Skip to datasheet

TPS7A3301Low-noise negative linear regulator

A quiet negative supply for precision analog circuits.

Manufacturer-referenced

Texas Instruments · TPS7A3301RGWR

VQFN-20SBVS169D · April 2015; package addendum June 2025

TPS7A3301 is a negative linear regulator for precision analog supplies. Two resistors set its output below ground, while a noise-reduction capacitor and feed-forward capacitor improve AC performance. It complements a positive regulator when a circuit needs bipolar supply rails. This example uses a −7 V input and an approximately −5 V output. The 332 kΩ resistor connects OUT to FB, the 102 kΩ resistor connects FB to ground, and EN connects to the negative input. Both input pins and both output pins must be joined to their respective rails. The selected SMD package is a 5 × 5 mm VQFN with twenty edge contacts and an exposed ground pad. A seven-lead TO-220 version is also specified by TI; this page currently previews the reviewed QFN version. Output current is limited by dropout, dissipation and the actual PCB cooling path.

3D View

Preparing 3D preview…
3D packageDrag to rotate · Scroll to zoom

Real View

TPS7A3301RGWR black QFN body with flush silver contacts and exposed underside pad.
TPS7A3301RGWR · VQFN-20Package illustration

Pinout

TPS7A3301VQFN-20Top view; EP is underneath
Select a pin to see its functionVQFN-20 · 21 pins

PCB Footprint

Loading footprint…
Powered by
Finding VQFN-20 packageTop view · mm

Component view