OUT
Function
Regulated negative supply rail.
How to connect
Join both OUT pins; bypass to ground with 47 µF.
Electrical note
Use ceramic capacitors, or put a polarized capacitor’s positive terminal at ground.
Explore TPS7A3301 pins, signal names, electrical functions and connection guidance for each package.
Select a pin to explore its connection
Click a lead or use the arrow keys. Top view; EP is underneath
Regulated negative supply rail.
Join both OUT pins; bypass to ground with 47 µF.
Use ceramic capacitors, or put a polarized capacitor’s positive terminal at ground.
No circuit connection is required.
Leave open in this example.
Error-amplifier feedback input, approximately −1.175 V in regulation.
332 kΩ from OUT to FB and 102 kΩ from FB to GND; 10 nF across the 332 kΩ resistor.
No circuit connection is required.
Leave open in this example.
No circuit connection is required.
Leave open in this example.
No circuit connection is required.
Leave open in this example.
Ground reference and heat-removal path.
Connect to ground copper; solder the exposed underside pad.
No circuit connection is required.
Leave open in this example.
No circuit connection is required.
Leave open in this example.
No circuit connection is required.
Leave open in this example.
No circuit connection is required.
Leave open in this example.
No circuit connection is required.
Leave open in this example.
Can be enabled by a sufficiently positive or negative control level.
Tie to IN for the always-enabled negative-rail example.
Ground disables; observe the specified positive and negative thresholds.
Reference filtering and output startup control.
Connect 1 µF ceramic to ground near the pin.
Negative supply, referred to ground.
Join pins 15 and 16 to −7 V; add 10 µF to ground.
Negative supply, referred to ground.
Join pins 15 and 16 to −7 V; add 10 µF to ground.
No circuit connection is required.
Leave open in this example.
No circuit connection is required.
Leave open in this example.
No circuit connection is required.
Leave open in this example.
Regulated negative supply rail.
Join both OUT pins; bypass to ground with 47 µF.
Use ceramic capacitors, or put a polarized capacitor’s positive terminal at ground.
Ground reference and heat-removal path.
Connect to ground copper; solder the exposed underside pad.