Skip to datasheet
Gas, humidity, pressure and temperature sensor

BME680 Basic Circuit

Build a basic BME680 circuit with labeled pins, component values and connection guidance.

BME680 in a circuit

Eight contacts, two supply bypasses and I²C pullups.

BME680 with 3.3V rails, CSB high, SDO low, two I2C pullups and a host showing illustrative environmental readings.
Values illustrate compensated units; gas resistance and IAQ are separate outputs.

Connect it, step by step

Follow the component values and pin connections

Wire the supplies

Bypass VDD and VDDIO separately and allow the heater pulse current.

Set the interface

Tie CSB high, ground SDO for 0x76 and connect SDA/SCL.

Validate the sample

Check new-data, gas-valid and heater-stable status before interpreting the result.

Component view