GND
Function
First ground contact.
How to connect
Join common ground with contact 7.
Explore BME680 pins, signal names, electrical functions and connection guidance for each package.
Select a pin to explore its connection
Click a lead or use the arrow keys. Top view · clockwise numbering
First ground contact.
Join common ground with contact 7.
Active-low SPI select and interface selection.
For I²C, connect directly to VDDIO.
SPI input or I²C data.
Connect to controller SDA with a VDDIO pullup for I²C.
Clock from the host.
Connect to controller SCL with a VDDIO pullup for I²C.
SPI output or I²C address selection.
Ground selects 0x76; VDDIO selects 0x77.
Do not float in I²C; leave unconnected in three-wire SPI.
Logic supply.
Use 1.2–3.6 V with a 100 nF local bypass.
The example uses 3.3 V, not 5 V.
Second ground contact.
Join contact 1 and host ground.
Sensor and heater supply.
Use 1.71–3.6 V and a separate 100 nF bypass.
Allow the heater pulse current in the supply budget.