Practical projects, fresh perspectives and in-depth tutorials.
Your next engineering idea starts here.
Download the TTP229 Touch Keypad Library for Proteus V1.0: a 16-key capacitive keypad with clickable pads, option pads and an Arduino demo.
Read article →Download the Membrane Keypad Library for Proteus V1.0: clickable 4x4 and 4x3 keypads, an Arduino scanning demo, ghost keys and contact bounce.
Read article →Download the Capacitive Soil Moisture Sensor Library for Proteus V1.0: the v1.2 board on A0, air and water calibration, depth and air gaps.
Read article →Download the Turbidity Sensor Library for Proteus V1.0: an optical turbidity sensor on A0, the NTU curve, the A / D switch and calibration.
Read article →Download the TDS Meter Library for Proteus V1.0: an analog TDS sensor on A0, the ppm conversion, temperature compensation and calibration.
Read article →Download the YF-S201 Water Flow Sensor Library for Proteus V1.0: Hall pulses on D2, 450 pulses per litre, calibration and an Arduino flow meter demo.
Read article →Download the BME680 Gas Sensor Library for Proteus V1.0: gas resistance, temperature, humidity and pressure over I2C or SPI, with an Arduino demo.
Read article →Download the CCS811 Air Quality Sensor Library for Proteus V1.0: eCO2 and TVOC over I2C, nWAKE, nINT, drive modes, run-in, ENV_DATA and an Arduino demo.
Read article →Download the PMS5003 Particle Sensor Library for Proteus V1.0: PM1.0, PM2.5 and PM10 over UART, passive mode, sleep, SET, RESET and an Arduino UNO demo.
Read article →Download the MH-Z19B CO2 Sensor Library for Proteus V1.0: NDIR CO2 over UART and PWM, preheat, T90, zero calibration, ABC and an Arduino UNO demo.
Read article →