Practical projects, fresh perspectives and in-depth tutorials.
Your next engineering idea starts here.
Download the ESP32-DevKitC V4 Library for Proteus: run your ESP32 sketch on the 38-pin board with Wi-Fi, UDP, PWM, touch and a phone panel.
Read article →Download the ESP32 DevKit V1 Library for Proteus V2.0: run your ESP32 sketch with Wi-Fi, a web server, a phone panel and ESP-01 modules.
Read article →Download the MCP2515 CAN Bus Module Library for Proteus V1.0: CAN frames bit by bit, arbitration, error frames and two Arduino nodes.
Read article →Download the MAX485 RS485 Module Library for Proteus V1.0: a half-duplex bus, Modbus RTU frames decoded and a master and slave on Arduino.
Read article →Download the Micro SD Card Module Library for Proteus V1.0: SPI mode, a FAT16 card, a file browser and a data logger on Arduino.
Read article →Download the DS3231 RTC Module Library for Proteus V1.0: a real time clock with alarms, SQW, the coin cell and an AT24C32 EEPROM on Arduino.
Read article →Download the 433MHz RF Module Library for Proteus V1.0: an FS1000A transmitter and an XY-MK-5V receiver with noise, range and rc-switch codes.
Read article →Download the DFPlayer Mini Library for Proteus V1.0: an MP3 module with a micro SD card, BUSY and the 7E FF 06 frames, played from an Arduino.
Read article →Download the Fingerprint Sensor Library for Proteus V1.0: an R307 / AS608 module with six fingers to enroll and search from an Arduino.
Read article →Download the IR Receiver + Remote Library for Proteus V1.0: a VS1838B receiver and a clickable 21-key NEC remote with an Arduino IRremote demo.
Read article →