PCB Fabrication House - PCB Solution by PCBWay
Hey Fellas! This is a platform where we always strive to provide you quality content based on your field of interest. Today, I am going to discuss the details and characteristics of one of the best PCB service providers called
PCBWay
You need to be very vigilant and follow the protocols required for developing the clinical project that comes with no or minimum problems during the troubleshooting process.
Development of project starts with building its design and the selection of components needed to produce the project in real time.
PCB Fabrication House
Measurements and steps taken in the early stage can save you bunch of time in the execution process. If you are professional, you may already have got your hands on many electronic projects, however, if you are newbie or students and getting your project done for very first time, you need help from outside.
The development of project mainly depends on the company you choose for buying components where technical support is complimentary. You can not pick any company and get away with it. It can put your project at huge risk. If sensors are the main parts of your project, you require accurate and precise boards that can incorporate with these sensors easily.
This is why I am here to keep you on the safe side. I am going to give a quick review about an outstanding company called
PCBWay that best suits your PCB needs and provide you both i.e. economical price with technical support.
Following are the main reason why I'd prefer this company.
Sponsorship Program
When it comes to determining the parameters required to produce a dynamic project, competitive cost tops the list. You can not turn your creativity into reality if you constantly worry about the project cost.
This is where this company comes handy. They help you sponsor your project right from the start to the completion of the whole project. They keep you updated and help you step by step, so you don't feel left out in the process.
If you are a student or newbie who is going to step in very first time in the electronic project, don't forget to get a benefit from their sponsorship program.
PCB Assembly
Getting quality
PCB is a half work done. Next step requires more attention and skills where you have to place components on the board. How you get your board ready depends on your expertise and attention you put in the process. However, if you are unsure about the component placement on the board, you can get help from the professional support given by this company.
Components are placed on the board using two technologies i.e. SMT (surface mount technology) and Thru-hole technology. SMT is highly preferable where components are placed directly on the board.
They can help you with following SMT types.
• Quad Flat Pack No-Lead (QFN)
• Quad Flat Package (QFP)
• Ball Grid Array (BGA)
• Ultra-Fine Ball Grid Array (uBGA)
• Package-On-Package (PoP)
• Small Chip Packages (pitch of 0.2 mm)
• Small Outline Integrated Circuit (SOIC)
• Plastic Leaded Chip Carrier (PLCC)
Note. SMD-Stencil is also available where components are laid out on the board that comes with solder paste. However, SMD-Stencil comes with more cost as compared to a regular circuit board.
Highly Qualified Staff
They come with highly qualified staff, making development process easy and hassle-free. You can maintain a communication with them through customer service team.
The technical support given by the companies across the web mainly focus on their financial gains rather than solving your problems at first place.
That's why I recommend this company that keeps visitors' demands on the top and leave no footprint when it comes to providing a clinical solution to every problem.
If you are in the middle of development of your project or in the execution process, they will go out of their way to provide you technical support.
Note: Quotation calculator is a remarkable addition to their site where you can choose the parameters of the board you require and get an instant quote. You can get your
quote here.
Quality Product with Economical Price
Economical price is another factor where they stay ahead of their competitors. If you intend to order few or in bulk, they will provide you the most competitive price. Less price doesn't put you in the doubt of getting the low-quality product.
There are different factors involved when it comes to checking the quality of the board i.e. traces quality, substrate, resistance capability, and exposure of silkscreen and solder mask on the board.
They have a separate department to check the quality of the board, where a board goes through a proper testing process. The copper traces are accurately aligned on the board and the possibility of broken layers is minimized. The board comes with a resistive layer which can endure the projects undergo high temperature and pressure.
They have recently partnered with third-party testing service called Huizhou Lier Laboratory, which has already provided dynamic test results for many manufacturers across the globe. Their main aim is to provide thermal stress detection that highlights the appearance observation and section observation. They also check the location of each PCB hole, so every component is placed on the board as required.
Types of PCB
You have a choice of picking different boards ranging from a single layer,
double sided, multilayer, rigid flex to the
high-frequency board.
High-frequency boards are an ideal choice where signal communication is required. These boards are used in satellite, mobile network, and Wifi Systems. Teflon and FR4 are the most common substrate used in the manufacturing of high-frequency boards. The substrate you pick depends on the nature and complexity of the project.
Teflon is costly and comes with high DK and DF factors while FR4 is cheap but considered as a low-quality substrate where the quality of signal communication can be compromised. You can order any substrate based on your requirements.
PCBWay is a one-stop shop that provides PCB solution to your technical requirements including procurement, production, and assembly.
Shared Project System
Nothing is more satisfying than getting your project done as expected. If you successfully complete your project, you can send them details, and they share your project on the website. In this way, you come with a good chance of highlighting and describing your skills to the wider audience.
They score and evaluate every project in terms of creativity, usability, content, design and announce the best project every week. They focus on better user experience where you can provide your suggestions and feedback.
That's all for today. I have tried my best to highlight the main features of this company. However, if you need any help or question, you can ask me in the comment section below. Thanks for reading the article.
PCB Solution You Need by WellPCB
Hey Friends! This is a platform where we keep you updated with useful information so you keep coming back every now and then. Today, I am going to give a quick review about one of the best PCB solution providers called
WellPCB.
Developing electronic project becomes easy when you know all components will be produced as per your requirement. You can't compromise anything when you need accurate and precise results.
The breadboard is useful for developing the electronic project, but it provides a temporary solution and takes a lot of your time because misplacement of one wire can put you in trouble. However, when things go complex and require a permanent solution, breadboards fail to fulfill the requirement. In that case, you switch your mode of operation from breadboard to
PCB that provides a permanent solution and sets you free from the hassle of constantly checking the whole circuitry again and again.
There are many PCB prototype and assembly services that claim to be best for providing flawless PCB solution to your electronic projects. However, you can not predict the performance of companies unless you have practical experience working with them.
The company we prefer most of the time is WellPCB that keeps your demands on the top and helps you design your project.
PCB Prototype and PCB Assembly Service Provider
If you come with a technical background, you must be aware of the importance of quality PCB. You can not compromise your whole project for the sake of getting low-quality product. When you intend to design your project, you are highly concerned about picking the right PCB solution provider that helps you achieve your goals and turns your innovative ideas into reality.
This is the reason, today I am going to give an unbiased review about an outstanding PCB service provider. Following are the main reasons why you should prefer
WellPCB over others.
Quality Assurance
This company comes with 10-years experience in the designing of printed boards and encompasses all the certification required to produce the quality product. Following are the certifications they have got so far, based on the quality product they produce.
- ISO14001 (2004) ISO9001 (2008), Certified
- UL Certified
- TS16949 (2009) Certified
- All products follow the IPC & ROHS Standard
These certifications will help you make the final decision about PCB board you intend to produce. They don't put your demands on stake for getting their financial gains. They know how to keep customers satisfied by providing dynamic and flawless service, so customers feel no hesitation in choosing their company again and again.
They have allocated separate department for maintaining quality assurance that keeps a proper check on the quality of the product. They do a regular inspection of the PCB equipment and follow strict protocols to maintain the top-notch service.
Flexible PCB Manufacturing Services
You can get a single layer or double layer board based on your requirements. However, the number of layers would increase when the nature of your project goes complex. Don't you worry, you can place an order for getting PCB covered with up to 32 layers. This gives you the flexibility of choosing the number of layers from many given options.
Finished copper ranges from 0.5 to 5 ounces where the thickness of 1-ounce means; 1-ounce of copper will be laid out on the area of one square foot of the board.
Finished board thickness ranges from .2 to 5 mm that all depends on the complexity and the nature of your board. When you have given all options to choose from, it helps you make a final decision that aligns with your demands and helps you incorporate the board into the project.
PCB Assembly
PCB assembly is an important service provided by them. If you are not too technical, you’d prefer getting both PCB and PCBA (Printed Circuit Board Assembly) services from one stop.
This company not only provides you quality board but also helps you mounting the required components on the board, so you can pay attention to other parts of the project like designing and troubleshooting. You can choose from Surface Mount or Thru-Hole technology.
They provide you a number of boards ranging from a
single layer, double layer, rigid board, multilayer, to
rigid-flex boards.
The final product you get will be covered with silkscreen and solder mask that makes copper traces in place and provides insulation in case board is subjected to high temperature and pressure.
Fast Delivery
Time is very important especially when you are working on client's project and you have to deliver on time. Lead time is very fast and you can get your board ready between 1 to 5 working days. However, it mostly depends on the nature of the board and the number of board you intend to get.
Mass production requires more time, in that case, lead time can increase from 7 to 14 working days.
Economical Price
You will get quality boards in economical price. If you order few or in bulk, don’t worry about the quality of the boards.
Note. Don’t forget to claim 100$ bonus if you are a newbie and joining their community very first time.
You can get 10 pieces covering one or two layers in just 3.99$. However, low price doesn’t put you in doubt of getting the low-quality product. The final product you get will truly resonate with your demands.
In case you find the final product you got is not what you ordered, you can replace the order immediately. They come with quality customer service and go extra mile unless they are sure customers are completely satisfied. You can get an instant quote
here.
That’s all for today. I hope you have got enough information about why you should prefer this company that helps you fulfill your demands and requirements at first place. In case, you are feeling unsure or have any question you can ask me in the comment section below. I’d love to help you in any way I can. Give your valuable feedback and suggestions, they help us provide you quality content that resonates with your field of interest. Thanks for reading the article.