Skip to datasheet

TPS63000Adjustable single-inductor buck-boost converter

Keep a regulated rail as the battery moves above and below the output voltage.

Manufacturer-referenced

Texas Instruments · TPS63000DRCR

VSON-10 + EPSLVS520C · October 2015

TPS63000 is an adjustable synchronous buck-boost converter. Its four-switch power stage and one external inductor regulate the output whether the input is higher or lower than the required rail. It automatically changes between buck and boost operation. The selected TPS63000DRCR uses a 3 × 3 mm VSON package with ten flush plated contacts and an exposed power-ground pad. The pin arrangement, physical package and downloadable footprint agree. It is the adjustable part; TPS63001 and TPS63002 are separate fixed-output variants. The example uses a 2.2 µH inductor, local ceramic capacitors and a divider for nominal 3.3 V. The 1.8 A figure describes a typical switch-current limit, not a guaranteed 1.8 A load. Output capability depends on input voltage, inductor saturation, losses and thermal design.

3D View

Preparing 3D preview…
3D packageDrag to rotate · Scroll to zoom

Real View

TPS63000 black 3 mm VSON body with ten bright silver flush contacts and underside ground pad.
TPS63000DRCR · VSON-10 + EPPackage illustration

Pinout

TPS63000VSON-10 + EPTop view · ten edge contacts and exposed pad 11
Select a pin to see its functionVSON-10 + EP · 11 pins

PCB Footprint

Loading footprint…
Powered by
Finding VSON-10 + EP packageTop view · mm

Component view