Skip to datasheet
Adjustable single-inductor buck-boost converter

TPS63000 Basic Circuit

Build a basic TPS63000 circuit with labeled pins, component values and connection guidance.

TPS63000 in a circuit

Physical contact numbering, inductor, local capacitors and feedback.

TPS63000 worked 3.3V circuit with local input/output capacitors and correct control connections.
All ground symbols share the circuit return. The underside pad is soldered to PGND. Component values and readings are nominal.

Connect it, step by step

Follow the component values and pin connections

Connect the power loop

Place 2.2 µH between L1 and L2 and connect local input/output capacitors.

Supply the controls

Feed VINA through its RC filter; tie EN high and PS/SYNC low for the example.

Set feedback

Use the output divider and feedforward capacitor, then verify the rail under load.

Component view