TPS63000 Reference Tables
Search the TPS63000 pin reference and manufacturer-referenced specification tables.
Pin reference
Signal names, electrical functions and connection guidance
Scroll within the table to see all columns and rows.
| Pin | Signal | Type | Function & connection |
|---|---|---|---|
| VOUT | Regulated output | Regulated output.Connection guidanceConnect output capacitors and the feedback divider. | |
| L2 | Inductor switching node | Inductor switching node.Connection guidanceConnect one end of the 2.2 µH inductor; other end to L1 pin 4. | |
| PGND | Power ground | Power ground.Connection guidanceReturn the high-current input/output capacitor loops here. | |
| L1 | Inductor switching node | Inductor switching node.Connection guidanceConnect the other end of the inductor from L2 pin 2. | |
| VIN | Power supply input | Power supply input.Connection guidanceBypass to PGND locally with 10 µF in the example. | |
| EN | Enable input | Enable input.Connection guidanceTie high to enable; low disables. Do not leave floating. | |
| PS/SYNC | Mode / clock input | Mode / clock input.Connection guidanceLow permits power save, high forces fixed-frequency operation; also accepts a synchronization clock. | |
| VINA | Control supply input | Control supply input.Connection guidanceUse the example 100 Ω from VIN and 0.1 µF to GND filter. | |
| GND | Control ground | Control ground.Connection guidanceJoin power ground at a quiet local connection. | |
| FB | Output feedback | Output feedback.Connection guidanceConnect the junction of 1.12 MΩ from VOUT and 200 kΩ to GND. | |
| PGND / EP | Exposed thermal pad | Exposed thermal pad.Connection guidanceSolder to PGND copper; underside pad is numbered 11 in this footprint. |
No pins match these filters. Try another signal name or reset the filters.
Package connections
Numbered physical contacts and underside pad
Scroll within the table to see all columns and rows.
| Parameter | Value | Conditions / notes |
|---|---|---|
| 1 · VOUT | Regulated output | Connect output capacitors and the feedback divider. |
| 2 · L2 | Inductor switching node | Connect one end of the 2.2 µH inductor; other end to L1 pin 4. |
| 3 · PGND | Power ground | Return the high-current input/output capacitor loops here. |
| 4 · L1 | Inductor switching node | Connect the other end of the inductor from L2 pin 2. |
| 5 · VIN | Power supply input | Bypass to PGND locally with 10 µF in the example. |
| 6 · EN | Enable input | Tie high to enable; low disables. Do not leave floating. |
| 7 · PS/SYNC | Mode / clock input | Low permits power save, high forces fixed-frequency operation; also accepts a synchronization clock. |
| 8 · VINA | Control supply input | Use the example 100 Ω from VIN and 0.1 µF to GND filter. |
| 9 · GND | Control ground | Join power ground at a quiet local connection. |
| 10 · FB | Output feedback | Connect the junction of 1.12 MΩ from VOUT and 200 kΩ to GND. |
| 11 · PGND / EP | Exposed thermal pad | Solder to PGND copper; underside pad is numbered 11 in this footprint. |
No specifications match. Try a parameter name or a unit.
Leadless contacts are plated lands, not long protruding legs. Pad 11 represents the soldered underside ground pad.
Supply and electrical characteristics
Read conditions alongside every rating
Scroll within the table to see all columns and rows.
| Parameter | Value | Conditions / notes |
|---|---|---|
| Input operating range | 1.8–5.5 V | Startup specification begins at 1.9 V |
| Adjustable output | 1.2–5.5 V | Use the external FB divider |
| Feedback voltage | 495 / 500 / 505 mV | Min / typ / max with PS/SYNC high |
| Oscillator | 1.25 MHz minimum; 1.5 MHz typical | Electrical characteristics table |
| Synchronization range | 1.25–1.8 MHz | Applied to PS/SYNC |
| Switch current limit | 1.6 / 1.8 / 2.0 A | Min / typ / max at VIN=VINA=3.6 V and TA=25°C |
| Output-current headline in buck | Up to 1.2 A at 3.3 V | VIN 3.6–5.5 V; practical thermal and component limits remain |
| Output-current headline in boost | Up to 800 mA at 3.3 V | VIN above 2.4 V; not at every input voltage |
No specifications match. Try a parameter name or a unit.
A current limit is not a guarantee of output current at every input voltage.
Control modes and startup
Define every logic input
Scroll within the table to see all columns and rows.
| Parameter | Value | Conditions / notes |
|---|---|---|
| EN low / high | Disabled / enabled | Low ≤0.4 V; high ≥1.2 V |
| PS/SYNC low | Power save permitted | Burst-like light-load activity is expected |
| PS/SYNC high | Forced fixed-frequency operation | Useful when predictable switching is preferred |
| PS/SYNC clock | External synchronization | Observe the specified frequency and logic ranges |
| Undervoltage lockout | 1.7 V typical falling | 1.5–1.8 V range at VINA |
| Shutdown current | 0.1 µA typical; 1 µA maximum | VIN=VINA=3.6 V, EN=0 V |
| Shutdown load disconnect | Output disconnected from input | Does not mean the output capacitor is instantly discharged |
No specifications match. Try a parameter name or a unit.
Power-save bursts are expected at light load and must not be mistaken for a defective oscillator.
Layout and passive components
A switching converter needs a compact PCB
Scroll within the table to see all columns and rows.
| Parameter | Value | Conditions / notes |
|---|---|---|
| Switching loop | Keep inductor and power capacitors close | Avoid long breadboard-style loops in real hardware |
| Feedback | Route away from switching nodes | Sense at the output capacitor; use a quiet ground return |
| Inductor | 2.2 µH in the worked circuit | Check peak/saturation current, DCR and core losses |
| Capacitors | Ceramic with adequate effective capacitance | DC bias can reduce nominal capacitance considerably |
| Exposed pad | Solder to PGND copper | Add thermal vias and paste windows appropriate to the assembly |
| Footprint scope | Core land geometry provided | PCB thermal extensions, solder mask and paste design remain assembly-specific |
No specifications match. Try a parameter name or a unit.
The illustrations explain connections, not a finished switching-power PCB layout.
Temperature and stress limits
Recommended operation and stress ratings are different
Scroll within the table to see all columns and rows.
| Parameter | Value | Conditions / notes |
|---|---|---|
| Ambient operating range | −40 to +85°C | Recommended free-air range |
| Junction operating range | −40 to +125°C | Recommended range |
| Storage | −65 to +150°C | Unpowered |
| Voltage stress | −0.3 to +7 V on specified electrical nodes | Absolute maximum; not an operating target |
| DRC junction-to-ambient | 46.8°C/W | Manufacturer reference board; actual layout changes temperature |
| Representative control current | 40 µA typical / 50 µA max at VINA | See source test conditions; this is not the total loaded input current |
| Thermal shutdown | 140°C typical; 20°C typical hysteresis | Protection threshold, not a normal operating temperature |
No specifications match. Try a parameter name or a unit.
Use real loss and thermal measurements for the intended load and input range.
Nominal 3.3 V circuit
Component choices and calculated load
Scroll within the table to see all columns and rows.
| Parameter | Value | Conditions / notes |
|---|---|---|
| VIN source | 2.0–5.5 V for the demonstration | Includes startup headroom; 3.7 V nominal example |
| Inductor | 2.2 µH between L1 pin 4 and L2 pin 2 | Low DCR and adequate saturation/peak-current rating |
| Input capacitor | 10 µF | Close to VIN5 / PGND3 |
| Output capacitors | 2 × 10 µF | Close to VOUT1 / PGND3; consider effective capacitance |
| Control filter | 100 Ω to VINA8; 0.1 µF to GND9 | Separate quiet control supply |
| Feedback | 1.12 MΩ top / 200 kΩ bottom | VOUT = 0.5 × (1 + 1.12 M / 200 k) = 3.3 V |
| Feedforward capacitor | Approximately 2 pF across the top resistor | 2.2 µs / 1.12 MΩ ≈ 1.96 pF; layout parasitics matter |
| Mode / load | PS/SYNC7 to GND; 33 Ω load | 100 mA nominal, 0.33 W load; use suitable resistor rating |
No specifications match. Try a parameter name or a unit.
Example values require validation in the actual PCB, including startup, transient behavior and effective capacitance.
No matching rowsTry a pin name, parameter, unit or test condition, or reset the filters.