Skip to datasheet

ACS712Hall-effect analog current sensor

Sense current magnetically and read an analog voltage.

Manufacturer-referenced

Allegro MicroSystems · ACS712ELCTR-05B-T

SOIC-8ACS712-DS · Rev. 22 · February 2024

ACS712 measures current using the magnetic field around an internal low-resistance copper conductor. Its Hall electronics convert that field into an analog output voltage, while keeping the signal-side terminals electrically separate from the primary current path. The SOIC-8 package has paired current contacts on one side and supply, output and filter contacts on the other. Available ±5 A, ±20 A and ±30 A versions use different sensitivities. At zero current the nominal output is half of the supply voltage. Positive current from IP+ to IP− raises the output; reversing current lowers it. The reference example selects ACS712ELCTR-05B-T and its nominal 185 mV/A response. A low-voltage 12 V, 12 Ω load draws approximately 1 A through the primary path. With the signal electronics powered at 5 V, the ideal output is about 2.685 V. Host firmware subtracts a measured zero-current baseline and divides by calibrated sensitivity; supply variation, noise, heating and magnetic interference affect real readings.

3D View

Preparing 3D preview…
3D packageDrag to rotate · Scroll to zoom

Real View

ACS712ELCTR-05B-T black SOIC-8 package with silver contacts and readable marking.
ACS712ELCTR-05B-T · SOIC-8Package illustration

Pinout

ACS712SOIC-8Top view
Select a pin to see its functionSOIC-8 · 8 pins

PCB Footprint

Loading footprint…
Powered by
Finding SOIC-8 packageTop view · mm

Component view