Skip to datasheet
Hall-effect analog current sensor

ACS712 Basic Circuit

Build a basic ACS712 circuit with labeled pins, component values and connection guidance.

ACS712 in a circuit

12 V primary load and separate 5 V signal domain.

ACS712 SOIC primary pins wired in pairs to12V12ohmload, with5Vsupply,bypass,filterandADCreading2.685V.
Nominal readings, not live measurements. Primary and signal returns are distinct in this example.

Connect it, step by step

Follow the component values and pin connections

Connect paired pads

Use both contacts on each side of the primary path.

Read voltage

Sample VIOUT against the signal-side ground.

Convert

Subtract the measured zero and divide by the correct sensitivity.

Component view