ADXL345Three-axis digital MEMS accelerometer
Measure acceleration along three axes, including gravity.
ADXL345 is a three-axis MEMS accelerometer with digital output. It measures static acceleration from gravity and dynamic acceleration from motion, vibration or impact. A 14-contact LGA package contains the mechanical sensing structure, conversion electronics, filtering and serial interface; this is an accelerometer, not a gyroscope. Selectable ranges span ±2 g to ±16 g. Full-resolution operation increases the number of useful result bits as the range grows, keeping the nominal scale near 3.9 mg per count. I²C or SPI transfers signed X, Y and Z readings, while a 32-sample FIFO and programmable interrupts reduce the host workload. The illustrated I²C example uses 2.5 V supplies, address 0x53, 100 Hz output and full-resolution ±2 g operation. With the top surface facing upward and the device stationary, an ideal Z result near +256 counts represents +1 g. Actual zero offset, sensitivity, mounting and temperature must be considered.
