VDD I/O
Function
Powers the digital interface.
How to connect
Use the 2.5 V logic rail with a local 100 nF ceramic capacitor.
Electrical note
1.7 V to VS; bus pull-ups use this rail.
Explore ADXL345 pins, signal names, electrical functions and connection guidance for each package.
Select a pin to explore its connection
Click a lead or use the arrow keys. Top view · 1 upper left
Powers the digital interface.
Use the 2.5 V logic rail with a local 100 nF ceramic capacitor.
1.7 V to VS; bus pull-ups use this rail.
Ground connection.
Join pins 4 and 5 and controller ground.
Manufacturer-defined reserved terminal.
Connect to VS or leave open; the example uses VS.
Ground connection.
Connect to the ground plane.
Ground connection.
Connect to the ground plane.
Powers the sensing electronics.
Use 2.5 V with a local 1 µF tantalum capacitor.
Recommended range 2.0–3.6 V.
Low selects SPI transactions; high enables I²C operation.
Tie to VDD I/O for the I²C example.
Programmable data-ready, activity, tap or FIFO interrupt.
Optional host input; unused output may remain open.
Second configurable interrupt route.
Optional host input; leave open if unused.
No internal connection.
Leave open.
Manufacturer-defined reserved terminal.
Connect to ground or leave open; the example uses GND.
SPI data output or I²C address selection.
Tie low for address 0x53; high selects 0x1D.
I²C bidirectional data or SPI data input/shared data.
Host SDA with a 4.7 kΩ pull-up to VDD I/O.
Clock from the I²C or SPI controller.
Host SCL with a pull-up to VDD I/O in I²C mode.