Skip to datasheet
Three-axis digital MEMS accelerometer

ADXL345 Basic Circuit

Build a basic ADXL345 circuit with labeled pins, component values and connection guidance.

ADXL345 in a circuit

2.5 V logic and supply, address 0x53, full-resolution ±2 g.

ADXL345 physical LGA with supply capacitors, grounded address and reserved pads, I2C pullups and a host showing Z plus one g.
Matching named nodes are connected. Values illustrate a stationary top-up sensor.

Connect it, step by step

Follow the component values and pin connections

Power

Bypass both supplies independently.

Configure

Write 0A to 2C, 08 to 31, then 08 to 2D.

Read

Burst-read registers 32 through 37 and preserve signed values.

Component view