Skip to datasheet

BMP388Digital barometric pressure sensor

From a tiny pressure diaphragm to a calibrated altitude estimate.

Manufacturer-referenced

Bosch Sensortec · BMP388

LGA-10BST-BMP388-DS001-07 · November 2020 · Revision 1.7

BMP388 is a digital barometric pressure sensor in a 2 mm square metal-lid package. A pressure-sensitive MEMS element and a temperature channel feed the conversion circuitry; the host reads raw values and applies the factory coefficients stored in that individual sensor. I²C or SPI carries the measurements, configuration and interrupt status. Oversampling and filtering trade response time for lower noise, while a 512-byte FIFO can reduce the frequency of host servicing. Temperature compensation is essential before interpreting pressure. This page documents the bare ten-contact BMP388, with a 3.3 V I²C example and an original PCB footprint. Bosch lists BMP388 as unavailable for new designs and recommends BMP390; the reference here retains BMP388’s own pin map and specifications.

3D View

Preparing 3D preview…
3D packageDrag to rotate · Scroll to zoom

Real View

Original BMP388 metal-lid pressure sensor with offset air port and ten silver underside contacts.
BMP388 · LGA-10Package illustration

Pinout

BMP388LGA-10Top view · pin 1 upper right
Select a pin to see its functionLGA-10 · 10 pins

PCB Footprint

Loading footprint…
Powered by
Finding LGA-10 packageTop view · mm

Component view