Skip to datasheet
Digital barometric pressure sensor

BMP388 Basic Circuit

Build a basic BMP388 circuit with labeled pins, component values and connection guidance.

BMP388 in a circuit

I²C wiring with separate local bypasses and a defined address.

BMP388 top view with 3.3V on VDD VDDIO and CSB, all grounds joined, SDO grounded for address76, two pullups and controller display.
Display values are illustrative compensated readings; the sensor is not measuring this webpage.

Connect it, step by step

Follow the component values and pin connections

Connect both rails

Use 3.3 V with one 100 nF bypass per supply; ground all VSS contacts.

Set the interface

Hold CSB high and SDO low; add clock and data pullups.

Read and compensate

Read ID and trim data, configure a measurement, then convert a complete sample using the BMP388 formulas.

Component view