Skip to datasheet

DHT11Digital temperature and humidity sensor

Two environmental readings over one timed data wire.

Manufacturer-referenced

ASAIR / Aosong · DHT11

Vented SIP-4DHT11 manual · December 2022

DHT11 combines a temperature and humidity sensing element with a calibrated digital processing circuit. The controller starts a transaction, then receives humidity, temperature and a checksum through one bidirectional data pin. This page follows Aosong’s December 2022 DHT11 manual: 3.3–5.5 V supply, −20°C to +60°C temperature and a 5–95%RH measuring envelope. Earlier DHT11 documentation and compatible parts can specify different limits or decimal-byte behavior; match the actual device revision. The four-lead blue sensor needs three electrical connections and an external pullup. Leave NC open, wait at least two seconds after power-up and between reads, and verify the checksum before displaying a measurement. The data line is neither I²C nor Dallas 1-Wire.

3D View

Preparing 3D preview…
3D packageDrag to rotate · Scroll to zoom

Real View

Original blue DHT11 vented enclosure with visible air openings, four silver leads and a clear label.
DHT11 · Vented SIP-4Package illustration

Pinout

DHT11Vented SIP-4Front view · vent face toward you · leads down
Select a pin to see its functionVented SIP-4 · 4 pins

PCB Footprint

Loading footprint…
Powered by
Finding Vented SIP-4 packageTop view · mm

Component view