PIN 1 · Supply
SupplyVCC
Function
Positive supply input.
How to connect
Connect to 3.3–5.5 V. The example uses 5 V and a local 100 nF bypass.
Electrical note
Use a controller whose input tolerates the chosen data pullup voltage.
Explore DHT11 pins, signal names, electrical functions and connection guidance for each package.
Select a pin to explore its connection
Click a lead or use the arrow keys. Front view · vent face toward you · leads down
Positive supply input.
Connect to 3.3–5.5 V. The example uses 5 V and a local 100 nF bypass.
Use a controller whose input tolerates the chosen data pullup voltage.
Single data line carries the start pulse, response and 40-bit frame.
Use an open-drain or switchable input/output GPIO and an external pullup.
This is the DHT pulse-width protocol, not I²C or Dallas 1-Wire.
Unused physical lead.
Leave unconnected.
Supply and data reference.
Connect to the controller ground.