Skip to datasheet

LIS3DHLow-power three-axis accelerometer

Sense movement, tilt and free fall with a tiny digital accelerometer.

Manufacturer-referenced

STMicroelectronics · LIS3DH

LGA-16DocID17530 Rev. 2 · December 2016

LIS3DH is a three-axis MEMS accelerometer with selectable ±2, ±4, ±8 and ±16 g ranges. Its I²C or SPI interface returns signed acceleration samples, while configurable interrupts support motion, free fall, orientation and click detection without continuous host polling. Choose high-resolution, normal or low-power mode to balance 12-, 10- or 8-bit output against bandwidth and current. Measurements occupy left-aligned 16-bit registers, so the host must shift the data and use the sensitivity for the selected mode and range. A 32-sample FIFO helps group transfers. The 3 mm LGA has sixteen contacts arranged in unequal banks: five on each vertical edge and three on the top and bottom. This reference shows the bare sensor at 3.3 V, the required ground on reserved pin 10, auxiliary ADC limitations and an original footprint following ST’s MEMS mounting guidance.

3D View

Preparing 3D preview…
3D packageDrag to rotate · Scroll to zoom

Real View

Original black LIS3DH 3 mm LGA sensor with silver underside contacts, pin-one indicator and centered laser-style marking.
LIS3DH · LGA-16Package illustration

Pinout

LIS3DHLGA-16Top view · 5 / 3 / 5 / 3 contact banks
Select a pin to see its functionLGA-16 · 16 pins

PCB Footprint

Loading footprint…
Powered by
Finding LGA-16 packageTop view · mm

Component view