Skip to datasheet
Low-power three-axis accelerometer

LIS3DH Basic Circuit

Build a basic LIS3DH circuit with labeled pins, component values and connection guidance.

LIS3DH in a circuit

Two rails, three ground contacts and a defined I²C address.

LIS3DH physical 16-pin LGA with Vdd VddIO CS3.3V, GND5 RES10 GND12 grounded, SA0low, SDA and SCL pullups, bypass and host.
Matching net labels connect. Interrupt and auxiliary ADC contacts are unused in this polling example.

Connect it, step by step

Follow the component values and pin connections

Power the sensor

Connect both rails and the required supply bypasses.

Set the interface

CS high selects I²C; ground SA0 for 0x18 and ground RES10.

Read correctly scaled data

Use a coherent burst and the shift/sensitivity for the selected mode.

Component view