Practical projects, fresh perspectives and in-depth tutorials.
Your next engineering idea starts here.
Download the DS3218 Servo Motor Library for Proteus V1.0: a 20 kg digital servo with its real 500 - 2500 us range, torque, current and stalls.
Read article →Download the MG90S Servo Motor Library for Proteus V1.0: a metal gear micro servo with real timing, torque from the supply, stalls and droop.
Read article →Download the LM393 Speed Sensor Library for Proteus V1.0: a 20-slot encoder disc and D0 pulses with real comparator chatter, counted by an Arduino.
Read article →Download the DC Tachogenerator Library for Proteus V1.0: 7 V per 1000 RPM with real ripple and load sag, read by an Arduino through a divider.
Read article →Download the Analog Panel Meter Library for Proteus V1.0: an 85C1 moving-coil meter whose needle averages an Arduino PWM, overshoots and settles.
Read article →Download the X27.168 Speedometer Gauge Library for Proteus V1.0: a car gauge stepper on four Arduino pins, with zeroing, ramps and lost steps.
Read article →Download the 30A Brushless ESC Library for Proteus V1.0: arm it, start a brushless motor without sensors and drive it from an Arduino.
Read article →Download the A2212 Brushless Motor Library for Proteus V1.0: a 1000KV drone motor with a spinning prop, real thrust and phase currents, and an ESC demo.
Read article →Download the 130 DC Motor Library for Proteus V1.0: the 3-6 V hobby motor with a spinning fan, real back-EMF, current and stalls, and an Arduino demo.
Read article →How to install an inline natural gas flow meter: data to collect, straight pipe runs, wiring and safety, a commissioning checklist and maintenance tips.
Read article →