Practical projects, fresh perspectives and in-depth tutorials.
Your next engineering idea starts here.
Download the INA219 Current Sensor Library for Proteus V1.0: the GY-219 current, voltage and power monitor and a DC load for Arduino.
Read article →Download the MLX90614 IR Thermometer Library for Proteus V1.0: the GY-906 non-contact sensor with SMBus, PEC and emissivity for Arduino.
Read article →Download the MAX6675 Thermocouple Library for Proteus V1.0: the MAX6675 module and a K-type probe with cold-junction compensation for Arduino.
Read article →Download the HX711 Load Cell Library for Proteus V1.0: the HX711 module and 1, 5 and 20 kg load cells for an Arduino scale, with tare and calibration.
Read article →Download the DS18B20 Library for Proteus V1.0: the TO-92 and the waterproof probe on a real 1-Wire bus, several sensors and parasite power.
Read article →Download the DHT11 / DHT22 Library for Proteus V1.0: temperature humidity sensor modules that answer the real 40-bit protocol.
Read article →Download the WS2812B NeoPixel Library for Proteus V1.0: RGB LED rings of 12, 16, 24, a stick of 8 and an 8x8 matrix that read every bit.
Read article →Download the Relay Module Library for Proteus V1.0: 1, 2, 4 and 8-channel 5V relay modules that switch, bounce and need 7 ms.
Read article →Download the PCA9685 Servo Driver and SG90 Servo Motor Library for Proteus V1.0: 16 PWM channels on I2C and an SG90 that really turns.
Read article →Download the 28BYJ-48 Stepper Motor and ULN2003 Driver Library for Proteus V1.0: a dial at the real gear ratio, half / full step and lost steps.
Read article →