Hello Everyone! I hope you all are doing well. Today, I am going to share the 12th chapter in the PCB learning series. In today's lecture, we will have a look at the Different Types of PCB(Printed Circuit Board).
We are familiar with the PCB, it is a printed circuit board that contains traces, lines and paths to electrically connect electronic components. It consists of a substrate on which copper conducting material is laminated for creating an electrical connection between components.
Let's dive in and explore these types of PCB boards:
Types of PCB(Printed Circuit Boards)
Following is the list of available types of PCB types. You can choose any PCB based on your requirements:
- Single-Layer PCB
- Double Layer PCB
- Multilayer PCB
- Rigid PCB
- Flex PCB
- Rigid-Flex PCB
- High-Frequency PCB
- Aluminium Backed PCB
1. Single Layer PCB
-
A single Layer PCB contains only one layer of conductive copper foil.
- One
side of the base material(substrate) is laminated with metal(normally copper) that is used to build an electrical connection between the components soldered on the board.
- Copper is mostly used for creating a conducting path because it acts as a good conductor and comes with low resistance.
- A solder mask is used on top of the copper layer which provides solid protection.
- On the top of the solder mask, there exists a silkscreen coating that is used for marking the elements on the board.
- Single-layer PCB is an ideal choice for beginners, as mostly used in simple electronics which don't involve complex circuitry.
- They are easy to manufacture and less time-consuming.
- Cheap cost and easy availability make these PCBs an ideal choice for hobbyists.
- These
low-cost boards are widely used in many applications including stereo
components, calculators, cameras, power supplies and printers.
2. Double-Layer PCB
- Double-Layer PCB contains two layers of copper material and substrate material is present in between these copper layers.
- Both layers are connected to each other using holes(called vias) drilled into the boards.
- Components on these PCB boards are connected using two technologies i.e. Through Hole Technology and Surface Mount Technology.
- Double-sided
PCB features a moderate level of complexity and is mostly used in
applications including automotive dashboards, LED lighting, vending
machines, amplifiers, HVAC system, instrumentation etc.
3. Multilayer PCB
- Multilayer PCB
contains multiple layers of copper and is designed with a combination of single-sided and double-sided PCB boards.
- A
layer of insulation(substrate material) is placed between each board in
order to provide protection that prevents the components from burning
in case of excessive heat.
- Multiple layers allow the professionals to design complex designs which help in accomplishing complex electrical tasks.
- The
extra layers incorporated in the multilayer design are very helpful and
often used for preventing electromagnetic interference emitted by the
design itself.
- Multilayer PCBs are widely used in a number of
applications including Satellite systems, GPS technology, Data storage,
File servers and Weather analysis systems.
4. Rigid PCB
- Rigid PCB
has a hard base material(substrate), normally of fiberglass/epoxy resin
and provides strength to the circuits by making them rigid.
- A computer motherboard is an ideal example of a rigid PCB that is composed of rigid substrate material.
- The
motherboard is a multilayer PCB that is designed to distribute
electricity from the power supply and helps in creating a conducting
path between different parts of the computer including CPU, RAM and GPU.
5. Flexible PCB
- Flexible PCB
can flex or transform into any shape based on needs/requirements.
- Flexible
PCBs are also referred to as Flex Circuit and use plastic material in
contrast to rigid PCBs, which use fiberglass that provides rigidity and
strength to the PCB.
- The conducting material used in these PCBs is mostly composed of polyester, polyamide or PEEK (Polyether ether ketone).
- These
PCBs pertain to a high level of complexity and come with different
layers ranging from single-sided, double-sided or multi-layer flex
circuits.
- The flexible nature sets these PCBs apart from others as they can be folded and wrapped around the corner.
- In
order to avoid environmental hazards, flexible PCBs are composed of
materials that are resistant to high-temperature oils,
corrosion-resistant, waterproof and shockproof.
- These flex
circuits are used in a wide range of applications including Flex solar
cells, LCD fabrication, Cellular telephones, automotive industries,
Laptops, cameras, LEDs and many more.
6. Rigid-Flex PCB
- Rigid-Flex PCB
is manufactured when a flexible PCB is combined with a rigid PCB.
- This gives both flexibility and strength to the electronic product.
- Rigid-Flex PCB is more expensive and difficult to design as compared to Rigid or Flexible PCB.
- Less
space required to construct a whole circuit and minimum weight makes
these PCBs an ideal choice for handheld electronic devices including
pacemakers, automobiles, cell phones and digital cameras.
7. High-Frequency PCB
- High-Frequency PCB
is slightly different in terms of construction and material used for
traditional PCB and is capable of transmitting signals over 1GHz.
- These PCBs are often composed of materials like polyphenylene oxide, Teflon, and glass-reinforced epoxy laminate.
- Small
dielectric constant makes Teflon, an expensive choice for
high-frequency PCB and it also provides low water absorption and small
dielectric loss.
- You must take some things into consideration
before choosing high-frequency PCB for your projects like dielectric
thickness, dielectric constant and power dissipation.
- The
dielectric constant is the most important feature when it comes to
choosing high-frequency PCBs because if the dielectric constant changes
too quickly and is unable to maintain a constant state, it leads to
corrupting the digital signal which affects the overall performance of
the signal.
- Similarly, dielectric loss is directly proportional to
the signal loss and it also affects the signal transmission quality.
Smaller dielectric loss leads to smaller signal loss.
- High-Frequency PCBs, if used in a wet environment can affect the dielectric constant.
- The
material selection for making these PCBs is very important, the
material you pick must be resistant to heat and hazardous chemicals and
provides strength and durability to the PCB surface.
8. Aluminum-Backed PCBs
- Aluminum Backed PCBs
are similar to copper PCBs with some exceptions i.e. Substrate in aluminum-backed PCBs is made up of aluminum.
- These
PCBs are coupled with insulating material that provides less thermal
resistance, avoiding the heat from transferring to its backing.
- Aluminum is inexpensive, making almost 8.23% of the planet's weight, and leads to the most economical manufacturing process.
- PCBs made up of aluminum are easily recyclable and non-toxic in nature.
- Aluminum
is very durable than its counterparts like fiberglass or ceramic and
pertains to less damage during the installation and manufacturing
process.
- And aluminum is an ideal choice for dissipating heat from
the circuit components, allowing the heat to transfer into the
atmosphere rather than transferring it to the rest of the board.
- Aluminum
Backed PCBs are widely used in high-output power applications including
power supplies, automotive lights, traffic lights, motor controllers
etc.
- Aluminum-baked PCBs also pertain to high mechanical stability and have the capability of bearing high mechanical stress.
- In contrast to fiberglass boards, aluminum-backed PCBs provide less
thermal expansion, allowing the copper foil and insulation to stay
placed on the board, hence helping in increasing the overall lifespan of
the board.
That's all for
today. In the next tutorial, we will have a look at the Single Layer PCB in detail. I hope you have enjoyed these different types of PCB. However, if
still you feel any doubt or have any questions, you can ask me in the
comment section below, I'd love to help you according to the best of my
expertise. Stay tuned!
JLCPCB – Prototype 10 PCBs for $2 (For Any Color)
China’s Largest PCB Prototype Enterprise, 600,000+ Customers & 10,000+ Online Orders Daily
How to Get PCB Cash Coupon from JLCPCB: https://bit.ly/2GMCH9w