Introduction to SG3524
Hello friends! I hope you will be absolutely fine and having fun. Today, I will give you an elaboration on
Introduction to SG3524. I have already shared articles on Introduction to
74HC245,
74HC595,
CD4051,
L293D,
L298,
LF351 and
LF411. You should also go through all of these tutorials in order to have a better understanding. SG 3524 consists of all the important functions necessary to design inverters.
Moreover, using SG-3524 we can also design regulation power supplies as well as switching regulators. This all design is based on a single chip. High power applications can also be controlled through this device. SG-3524 is especially designed for voltage doublers without transformers, transformer coupled DC to DC converters. Their design was also related to work for switching regulators as well as polarity converters. This was the brief discussion about this Integrated Circuit (IC). Now, I am going to discuss about its different parameters including its features and applications. SG-3524 has a lot of amazing features e.g. 8mA stand-by current, a complete power control circuitry for Pulse Width Modulation (PWM), No committed output for push pull applications as well as for single ended applications and many more. SG 3524 ha several different real life applications. Its applications include transformer coupled DC to DC converters, switching regulators of either polarity, regulating power supply, transformer less voltage doublers, PWM techniques and a lot more. The further detail about the basics of SG-3524 IC will be given later in this artice.
Introduction to SG3524
SG3524 is an integrated circuit having all the desired functions which are required to design dual polarity converters. It can also be used to design transformer coupled DC to DC converters as well as transformer less voltage doublers, It has a complete power control circuitry for PWM, which is its unique and special feature. It provides uncommitted output for single ended and push pull applications. Its major application area includes switching regulators having any polarity and transformer coupled DC-DC converters. SG-3524 is given in the figure shown below.
1. SG3524 Pins
- SG-3524 has total sixteen (16) pins having separate individual function.
- Its all sixteen pins along with their serial number, are listed in the table given in the figure shown below.
2. SG3524 Pins Description
- Since different function is associated with each of the single pins.
- We must have to understand function associated with each pin.
- SG-3524 pin descriptions/functions are provided in the table shown in the figure below.
3. SG3524 Packages
- Packages basically show the different models/versions of the same device.
- SG-3524 has three different packages, all are listed in the table shown in the figure given below.
4. SG3524 Packages Dimensions
- Each package is assigned with a different dimension in order differentiate them properly.
- Dimensions of all the packages are provided in the table given in the figure shown below.
5. SG3524 Pinout
- Pinout diagram tells us about the proper and detailed pin configuration of any electronic device.
- I have already shared pinout diagram in my previous tutorials e.g. Introduction to LM117, LM224, LM258, LM311, LM348, LM358 and LM380, you must have a look on all these.
- SG-3524 pinout diagram is given in the figure shown below.
6. SG3524 Logical Diagram
- Logic diagram of a device shows the internal logic followed by that device to perform any action.
- SG-3524 logical diagram is given in the figure shown below.
7. SG3524 Ratings
- Ratings show the power requirements of any electronic device.
- SG-3524 ratings are given in the table shown in the figure below.
8. SG3524 Features
- Features are such parameters which can make a device more popular.
- SG-3524 features are listed in the table given in the figure shown below.
9. SG3524 Applications
- SG-3524 has a wide range of real life applications.
- Few of the major applications of this device are provided in the table shown in the figure given below.
In the tutorial
Introduction to SG3524, I have elaborated all the basic information about the use of SG-3524. I hope you have enjoyed this tutorial and waiting for your appreciation ;) If anything is missing in this article, please let me know so that I can immediately update it correspondingly. If you have any problem/issue, you can ask us in comments anytime. I will share other informative topics in my upcoming tutorials. So, take care and bye till my upcoming tutorial :)
IRFZ44N Datasheet, Pinout, Features, Equivalents & Applications
Hello everyone! I hope you all will be absolutely fine and having fun. Today, I am going to provide you a detailed
Introduction to IRFZ44N.
IRFZ44N belongs to the family of Metal Oxide Semiconductor Field Effect
Transistor (MOSFET). It is a power MOSFET. There are two types of MOSFET i.e. N-channel and P-channel. IRF-Z44N belongs to the N-channel family. It uses "
Trench" technology and is enveloped in a plastic structure. It has very low on state resistance. It has zener diode, which provides ESD protection up to 2 kilo-volt. It is a low cost device and provides higher efficiency. It is easily available in the market these days and is mostly known because of its vast applications. IRF-Z44N has modern features i.e. advance processing technology, ultra low on resistance, dynamic rating, avalanche rated completely, quick switching process and many more. It has a wide range of
real life applications including full bridge, push pull applications, consumer full bridge and a lot more. Let's discuss it in detail:
Introduction to IRFZ44N
- IRFZ44N belongs to the family of N-channel Power MOSFETs, covered in plastic body and uses "Trench" technology.
- Similar to other transistors, IRFZ44N pinout has three terminals named as Gate, Drain and Source. They are denoted by the alphabets G, D and S respectively.
- Its features include very low on state resistance, high speed processing technology, completely avalanche rated etc.
- Push pull systems and full bridge are few of its real life applications.
- You should also have a look at its Characteristic Curves in Proteus ISIS.
- IRF-Z44N is given in the figure on right side.
IRFZ44N Pinout
- Pin configuration of any device can be understood through its pinout diagram.
- IRFZ44N Pinout consists of three (3) pins having different individual functions.
- IRFZ44N Pinout along with their symbols are shown as follows:
| Pin No. |
Pin Name |
Pin Symbol |
|
1 |
Gate |
G |
| 2 |
Drain |
D |
| 3 |
Source |
S |
IRFZ44N Datasheet
- You should download IRFZ44N datasheet, if you want the in-depth study on this mosfet.
- Here's the link to IRFZ44N datasheet:
IRFZ44N Ratings
- Before using any electronic device its power requirements must be known.
- These power requirements can be known through its ratings.
- IRF-Z44N ratings are listed in the table given in the figure shown below.
IRFZ44N Features
- Features are such parameters which can make a device more and more popular.
- IRF-Z44N major features are listed in the table given in the figure shown below.
IRFZ44N Applications
- Most of the devices are usually known on the basis of their applications.
- IRF-Z44N real life applications are provided in the table shown in the figure given below.
That is all from the tutorial
Introduction to IRFZ44N. I have provided all the basic knowledge of IRF-Z44N. I hope you have enjoyed the tutorial and will appreciate my work. If you feel that there is something missing in this tutorial, please let me know as early as possible, so that I can update it in order to avoid any future inconvenience. If you have any problem regarding any engineering related issue, you can ask us in comments anytime. Our team is 24/7 available for your support. I will share different interesting topics in my upcoming tutorials. So, till then take care and bye bye :)