dept:Computer Engineering - Page 21 of 29

STM32 Serial Communication in Polling Mode TEP , The Engineering Projects , Boxes

12 - Nov - 2021

syedzainnasir

STM32 Projects

0 Comments

63.8K Views

UART Communication in stm32, usart communication in stm32, stm32 usart, stm32 serial communication, stm32 uart, stm32 usart, polling mode in stm32, polling mode serial stm32

USART is the acronym for Universal Synchronous-Asynchronous Receiver-Transmitter, and is the advancement of the old UART that was unable to handle synchronous communications; in computers, it deals with the management of communication via the RS-232 interface. Generally, in the communication between devices, there is a transmitter and receiver that can exchange data bidirectionally, thus it happens for example in the communication between the microcontroller and third-party peripherals. What is Serial Communication? In serial communications, the transmitting device sends information (bitstrea ...

UART Communication in stm32

usart communication in stm32

stm32 usart

stm32 serial communication

stm32 uart

stm32 usart

polling mode in stm32

polling mode serial stm32

First Project using STM32 in STM32CubeIDE TEP , The Engineering Projects , Boxes

12 - Oct - 2021

syedzainnasir

STM32 Projects

5 Comments

63.8K Views

Introduction to STM32 Microcontrollers, STM32 Family, STM32 Mainstream, STM32 Ultra-Low-Power, STM32 High-Performance, STM32 Wireless, The Nucleo Development Board, STM32 Nucleo-64 parts, STM32 Nucleo-64 connectors, Setting-Up the Tool-Chain, First Project in STM using STM32CubeIDE, Blinking LED, Steps to generate the config. files from STM32CubeMX, Creating a new STM32CubeMX project, User Code Blinking Led, Data type C programs

We will use for our examples STM32CubeIDE released by ST and completely free. STM32CubeIDE is a development tool and supports multi operative system (SO), which is part of the STM32Cube software ecosystem. STM32CubeIDE allows using a single platform to configure peripherals, to generate/compile/debug the code for STM32 microcontrollers and microprocessors. The framework used is Eclipse®/CDT, as tool-chain for the development is used GCC toolchain and GDB for the debugging. To start the project, you must first select the MCU and then initialize and configure the peripherals the user wants to ...

Introduction to STM32 Microcontrollers

STM32 Family

STM32 Mainstream

STM32 Ultra-Low-Power

STM32 High-Performance

STM32 Wireless

The Nucleo Development Board

STM32 Nucleo-64 parts

STM32 Nucleo-64 connectors

Setting-Up the Tool-Chain

First Project in STM using STM32CubeIDE

Blinking LED

Steps to generate the config. files from STM32CubeMX

Creating a new STM32CubeMX project

User Code Blinking Led

Data type C programs

Introduction to Nucleo Development Board TEP , The Engineering Projects , Boxes

12 - Oct - 2021

syedzainnasir

STM32 Projects

0 Comments

63.8K Views

To become familiar with the world of microcontrollers it is necessary to have a development board (also known as a kit), which generally allows you to start working on it easily. Fortunately, the ST provides a wide portfolio of development boards. In this guide, we will describe and use the Nucleo board. The Nucleo has been introduced a few years ago and its line is divided into three main groups: Nucleo-32; Nucleo-64; Nucleo-144. Nucleo-32 Development Board The number of pins available, so the package, gives the name to the board: Nucleo-32 uses an LQFP-32 package; Nucleo-64 and LQ ...

Introduction to STM32 Microcontrollers

STM32 Family

STM32 Mainstream

STM32 Ultra-Low-Power

STM32 High-Performance

STM32 Wireless

The Nucleo Development Board

STM32 Nucleo-64 parts

STM32 Nucleo-64 connectors

Setting-Up the Tool-Chain

First Project in STM using STM32CubeIDE

Blinking LED

Steps to generate the config. files from STM32CubeMX

Creating a new STM32CubeMX project

User Code Blinking Led

Data type C programs

Introduction to STM32 Family TEP , The Engineering Projects , Boxes

11 - Oct - 2021

oliviasmith

STM32 Projects

0 Comments

63.8K Views

In this guide, we will explain step by step to start programming on the STMicroelectronics (STM) platform, especially the STM32 family. The term, "STM32" refers to a family of 32-bit microcontroller integrated circuits based on the ARM® Cortex®M processor. The architecture of these CPUs (Central Processing Unit) is ARM (Advanced Risk Machine) which is a particular family of Reduced Instruction Set Computing (RISC). RISC architecture differs from Complex Instruction Set Computing (CISC) for its simplicity that allows you to create processors capable of executing instruction sets with shorter ti ...

Introduction to STM32 Microcontrollers

STM32 Family

STM32 Mainstream

STM32 Ultra-Low-Power

STM32 High-Performance

STM32 Wireless

The Nucleo Development Board

STM32 Nucleo-64 parts

STM32 Nucleo-64 connectors

Setting-Up the Tool-Chain

First Project in STM using STM32CubeIDE

Blinking LED

Steps to generate the config. files from STM32CubeMX

Creating a new STM32CubeMX project

User Code Blinking Led

Data type C programs

How to Increase EF Core Performance for Saving Multiple Entities? TEP , The Engineering Projects , Boxes

16 - May - 2021

syedzainnasir

ASP.NET Core

0 Comments

63.8K Views

How to Increase EF Core Performance for Saving Multiple Entities, savechanges vs bulksavechanges, bulksavechanges method, bulksavechanges ef core, ef core multiple data, ef multiple entities

Hello friends, I hope you all are doing great. In today's tutorial, we will have a look at How to Increase EF Core Performance for Saving Multiple Entities? EF Core works well for simple CRUD operations but for saving multiple entities EF Core provides poor performance. So, today we will use a third-party EF Core extension named "Z.EntityFramework.Extensions.EFCore", designed by ZZZ Projects, which will increase the EF Core performance significantly. I will be using a BulkSaveChanges Method of this library which is specifically designed for saving bulk data in an SQL database. ZZZ Projects is ...

How to Increase EF Core Performance for Saving Multiple Entities

savechanges vs bulksavechanges

bulksavechanges method

bulksavechanges ef core

ef core multiple data

ef multiple entities

How to use IF Else in Python TEP , The Engineering Projects , Boxes

11 - Jun - 2020

ayeshayounas

Python

0 Comments

63.8K Views

How to use IF Else Statement in Python, if else in python, if else python, python if else, if python, pyton if

Hello friends, I hope you all are doing great. In today's tutorial, I am going to show you How to use IF Else in Python. It's our 5th tutorial in python series. In our previous lectures, we have covered the detailed Introduction to Python and then we have also discussed Data Types in Python & How to use Strings in Python. So, now it's time to move on a little further. In today's tutorial, we will cover If else statement in python and its not that difficult to understand but quite an essential one as its use a lot in programming projects. So, let's get started with How to use IF Else State ...

How to use IF Else Statement in Python

if else in python

if else python

python if else

if python

pyton if