TEP DOWNLOAD CENTER

Project Files of Arduino Lilypad Simulation in Proteus

Libraries Code Projects Simulation

tep://download-terminal ArduinoLilypadSimulationinProteus.rar RAR archiveVerified0 downloads Free

LilyPad simulation with three indicator LEDs, Arduino LilyPad, Proteus simulation, LED input control

Proteus simulation · File 1 of 1

Download Proteus Simulation

Download Proteus Simulation comes as a RAR archive of 3 files (15.8 KB, 97.2 KB unpacked) holding a Proteus simulation and compiled HEX firmware.

DSNProteus simulation
HEXHEX firmware

Description

Proteus Simulation is the download package that goes with our tutorial Arduino Lilypad Simulation in Proteus. On this page you can download the RAR file (15.8 KB) and see what is inside before you save it: 3 files in 1 folders, a ready Proteus simulation and the compiled HEX firmware. The tutorial explains the design; this page gets the files onto your computer and into use.

What this package is

Proteus Simulation is the firmware package of Arduino Lilypad Simulation in Proteus: the compiled HEX (Arduino Lilypad Simulation in Proteus.cpp.hex), together with the Proteus project Arduino Lilypad Simulation in Proteus.DSN that runs it. Build the source with the compiler the tutorial names, or load the HEX straight away to see the project work.

The tutorial opens with: “Hello friends! In our previous tutorial, we installed the Arduino LilyPad library for Proteus .” That article is the detailed guide; the sections below cover the files.

What is inside the RAR file

Arduino Lilypad Simulation in Proteus.DSN – Proteus simulation, 93.1 KB
Arduino Lilypad Simulation in Proteus.cpp.hex – Compiled HEX file, 4.1 KB
Read me.txt – Text file, 30 B

The archive unpacks to 97.2 KB and carries its own README (Read me.txt), shown in the README tab above.

How to download

Use the download panel at the top of this page: after the counter (30 seconds for guests, 10 for members) the black button unlocks and ArduinoLilypadSimulationinProteus.rar comes straight from our content network. If the browser opens it instead of saving, use Save as; extract the whole archive before using anything inside it.

How to install

Step 1: Extract ArduinoLilypadSimulationinProteus.rar with Windows (Extract All), 7-Zip or WinRAR.
Step 2: In Proteus set the controller's Program File to Arduino Lilypad Simulation in Proteus.cpp.hex; on hardware, flash the same file.
Step 3: Open Arduino Lilypad Simulation in Proteus.DSN in Proteus and press Play.

Simulation and results

The included Proteus project (Arduino Lilypad Simulation in Proteus.DSN) is the quickest way to see Proteus working: open it, press Play and compare with the screenshots in the tutorial. If nothing runs, make sure every library file was copied before Proteus started and that Program File points at the HEX on your disk; the FAQs tab covers the usual causes.

Read the detailed guide

This page is for the files. The full tutorial, Arduino Lilypad Simulation in Proteus, explains the circuit and the code step by step and shows the working results and the simulation; read it before you build. Questions about the download or the installation go in the comments below; more Proteus downloads are listed further down this page.

The package is free for personal, educational and research projects; credit The Engineering Projects and link to this page when you share it rather than re-uploading the file.

Read Arduino Lilypad Simulation in Proteus

File Structure

ArduinoLilypadSimulationinProteus.rar3 files · 0 folders · 97.2 KB unpacked

HEX Arduino Lilypad Simulation in Proteus.cpp.hexCompiled HEX file 4.1 KB

DSN Arduino Lilypad Simulation in Proteus.DSNProteus simulation 93.1 KB

TXT Read me.txtText file 30 B

Gallery5 images from the tutorialOpen the tutorial

The circuit, the board and the results as they appear in Arduino Lilypad Simulation in Proteus. Open an image for its full size.

Components for the LilyPad LED simulation, Arduino LilyPad, Proteus simulation, LED input control — Components for the LilyPad LED simulation.

Original LilyPad input and LED circuit, Arduino LilyPad, Proteus simulation, LED input control — Original LilyPad input and LED circuit.

Original simulation showing the LEDs on, Arduino LilyPad, Proteus simulation, LED input control — Original simulation showing the LEDs on.

Original simulation showing the LEDs off, Arduino LilyPad, Proteus simulation, LED input control — Original simulation showing the LEDs off.

README

Read me.txt 1 lines

www.TheEngineeringProjects.com

Development1 release

2 Dec 2014
Download Proteus Simulationthis page

The only release of this package so far. When a newer version is published, it appears above with its own download page.

Installation4 steps

From the download to a working project, in order. The steps follow what the package contains.

You will need

Proteus Design SuiteProteus 7 or 8 (Labcenter), on Windows
WinRAR or 7-ZipWindows cannot open RAR archives on its own

Steps

1
Extract the archive
Right-click ArduinoLilypadSimulationinProteus.rar and choose Extract All (or open it with 7-Zip or WinRAR) into a folder you can find again.
2
Load the HEX file
In Proteus double-click the microcontroller, set Program File to Arduino Lilypad Simulation in Proteus.cpp.hex and run the simulation. For real hardware, flash the same file with your programmer.
3
Open the example simulation
Open Arduino Lilypad Simulation in Proteus.DSN in Proteus to see the wiring exactly as in the tutorial. Check the controller's Program File path, then press Play.
4
Follow the tutorial
Arduino Lilypad Simulation in Proteus explains every connection and setting in order; keep it open beside the files while you build.

How to add a library in Proteus 8

FAQs7 questionsContact TEP

How do I download Download Proteus Simulation?

Wait for the 30-second guest countdown on this page, then press the download button; the file comes straight from our storage. Members who are logged in skip the wait. If the browser opens the file instead of saving it, use its Save as option.

What is inside the archive?

Download Proteus Simulation comes as a RAR archive of 3 files (15.8 KB, 97.2 KB unpacked) holding a Proteus simulation and compiled HEX firmware. Open the File Structure tab for the full list of 3 files.

What should I do if the download does not start?

Check the browser's download list first; an ad blocker or a company firewall can also hold it back, so try another browser or network. If the file arrives incomplete, download it again. For an installation problem, read the Install tab or tell us in the comments with your software version and the exact error message.

Is this file free?

Yes. Every file in the TEP Download Center is free for learning, personal and student projects. If you share it, link back to this page or the tutorial so others find the latest version.

How do I check that the file arrived complete?

Compare its SHA-256 with the one on this page, bbf1b4e57161c4b26349ae5261751ae8f02856285d5e86f6ce6ba414b035e36f. In PowerShell run Get-FileHash "ArduinoLilypadSimulationinProteus.rar"; on macOS or Linux run shasum -a 256 "ArduinoLilypadSimulationinProteus.rar". The same value means the file is exactly the one in our storage; a different one means the download broke off, so download it again.

Do I need WinRAR to open the RAR file?

RAR archives need WinRAR, 7-Zip or another RAR-capable tool; Windows cannot open them on its own. Extract the whole archive before using the files.

How do I get the HEX file into the simulation?

Compile the sketch in the Arduino IDE (Sketch → Export Compiled Binary gives you the HEX next to the sketch), then in Proteus double-click the board, set Program File to that HEX and run.

preparing · ArduinoLilypadSimulationinProteus.rar

Rating

Your download will be ready shortly

Preparing your download…

Members skip the wait. Log in or join TEP.