Project Files of Stepper Motor Control using PIC Microcontroller

This is the download page of Simulation and Code, the file package of the tutorial Stepper Motor Control using PIC Microcontroller, published on The Engineering Projects in March 2016. Here you get the RAR file (21 KB) with a ready Proteus simulation and the compiled HEX firmware, the list of files it contains, the README when there is one, and the installation steps in order.

What this package is

Simulation and Code is the firmware package of Stepper Motor Control using PIC Microcontroller: the compiled HEX (clock.hex), together with the Proteus project Stepper Motor Control using PIC Microcontroller.DSN that runs it. Build the source with the compiler the tutorial names, or load the HEX straight away to see the project work.

The tutorial opens with: “Hello everyone, today I am going to share Stepper Motor Control using PIC Microcontroller.” That article is the detailed guide; the sections below cover the files.

What is inside the RAR file

• Stepper Motor Control using PIC Microcontroller.DSN – Proteus simulation, 115.6 KB
• clock.hex – Compiled HEX file, 1 KB
• programme.txt – Text file, 1 KB

The archive unpacks to 117.6 KB; there is no README inside, so the steps below stand in for it.

How to download

Use the download panel at the top of this page: after the counter (30 seconds for guests, 10 for members) the black button unlocks and Stepper Motor Control using PIC Microcontroller.rar comes straight from our content network. If the browser opens it instead of saving, use Save as; extract the whole archive before using anything inside it.

How to install

• Step 1: Extract Stepper Motor Control using PIC Microcontroller.rar with Windows (Extract All), 7-Zip or WinRAR, keeping its folders.
• Step 2: In Proteus set the controller's Program File to clock.hex; on hardware, flash the same file.
• Step 3: Open Stepper Motor Control using PIC Microcontroller.DSN in Proteus and press Play.

Simulation and results

The included Proteus project (Stepper Motor Control using PIC Microcontroller.DSN) is the quickest way to see Simulation and Code working: open it, press Play and compare with the screenshots in the tutorial. If nothing runs, make sure every library file was copied before Proteus started and that Program File points at the HEX on your disk; the FAQs tab covers the usual causes.

Read the detailed guide

This page is for the files. The full tutorial, Stepper Motor Control using PIC Microcontroller, explains the circuit and the code step by step and shows the working results and the simulation; read it before you build. Questions about the download or the installation go in the comments below; more PIC Projects downloads are listed further down this page.

The package is free for personal, educational and research projects; credit The Engineering Projects and link to this page when you share it rather than re-uploading the file.