Project Files of L298 Motor Driver Library for Proteus
Libraries
Code
Projects
SimulationL298 Motor Driver Library for Proteus.rar
L298 Motor Driver Library for Proteus
L298 Motor Driver Library for Proteus comes as a RAR archive of 2 files (2.1 KB, 15.7 KB unpacked) holding Proteus library files.
- LIBProteus library
- IDXProteus library index
Description
L298 Motor Driver Library for Proteus is the download package that goes with our tutorial L298 Motor Driver Library for Proteus. On this page you can download the RAR file (2.1 KB) and see what is inside before you save it: 2 files in 1 folder, the Proteus library files (LIB and IDX). The tutorial explains the design; this page gets the files onto your computer and into use.
What this library is
L298 Motor Driver Library for Proteus adds L298 Motor Driver to Proteus as a schematic component: once installed, the part appears in the Pick Devices list under its own name, with its real pin layout, and can be placed and wired like any built-in device. It is a symbol-and-footprint library: it draws and routes the part; to see it work in simulation, pair it with the HEX file or the controller model as the tutorial shows.
The tutorial opens with: “Hello everyone, I hope you all are doing great. Today, I am going to share a new L298 Motor Driver Library for Proteus .” That article is the detailed guide; the sections below cover the files.
What is inside the RAR file
- L298MotorDriverTEP.LIB – Proteus library, 15.6 KB
- L298MotorDriverTEP.IDX – Library index, 127 B
The archive unpacks to 15.7 KB; there is no README inside, so the steps below stand in for it.
How to download
Use the download panel at the top of this page: after the counter (30 seconds for guests, 10 for members) the black button unlocks and L298 Motor Driver Library for Proteus.rar comes straight from our content network. If the browser opens it instead of saving, use Save as; extract the whole archive before using anything inside it.
How to install
- Step 1: Extract L298 Motor Driver Library for Proteus.rar with Windows (Extract All), 7-Zip or WinRAR, keeping its folders.
- Step 2: Close Proteus and copy L298MotorDriverTEP.LIB and L298MotorDriverTEP.IDX into its LIBRARY folder (Proteus 8: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY).
- Step 3: Start Proteus, press P and search for "L298MotorDriverTEP"; place and wire it as in the tutorial.
Read the detailed guide
This page is for the files. The tutorial above explains the circuit and the code step by step and shows the working results; read it before you build. Questions about the download or the installation go in the comments below; more Proteus downloads are listed further down this page.
The package is free for personal, educational and research projects; credit The Engineering Projects and link to this page when you share it rather than re-uploading the file.
File Structure
File Structure127 B15.6 KBGallery5 images from the tutorialOpen the tutorial
Gallery5 images from the tutorialThe circuit, the board and the results as they appear in L298 Motor Driver Library for Proteus. Open an image for its full size.
Videofrom the tutorial
Watch the project run before you download. The player loads only when you press play.
L298 Motor Driver Library for ProteusWatch on YouTube
README
READMEDevelopment1 release
Development1 release-
L298 Motor Driver Library for Proteusthis page
The only release of this package so far. When a newer version is published, it appears above with its own download page.
Installation4 steps
Installation4 stepsFrom the download to a working project, in order. The steps follow what the package contains.
You will need
- Proteus Design SuiteProteus 8 or newer (Labcenter), on Windows
- WinRAR or 7-ZipWindows cannot open RAR archives on its own
Steps
- 1
Extract the archive
Right-click L298 Motor Driver Library for Proteus.rar and choose Extract All (or open it with 7-Zip or WinRAR) into a folder you can find again. Keep its folder structure (L298 Motor Driver Library for Proteus) as it is.
- 2
Copy the library files into Proteus
Move L298MotorDriverTEP.LIB and L298MotorDriverTEP.IDX into the LIBRARY folder of your Proteus installation: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY for Proteus 8, or the matching Proteus 7 folder. Older versions keep it under ProgramData\Labcenter Electronics. If Proteus is open, close it first.
- 3
Restart Proteus and place the component
Start Proteus, open a schematic, press P (Pick Devices) and search for the component by the name used in the tutorial. It appears with its pins ready to wire.
- 4
Follow the tutorial
L298 Motor Driver Library for Proteus explains every connection and setting in order; keep it open beside the files while you build.
FAQs10 questionsContact TEP
FAQs10 questionsHow do I download L298 Motor Driver Library for Proteus?
Wait for the 30-second guest countdown on this page, then press the download button; the file comes straight from our storage. Members who are logged in skip the wait. If the browser opens the file instead of saving it, use its Save as option. The download link is made for you when the countdown ends and works for 15 minutes; a saved or shared link stops working, so share this page instead.
What is inside the archive?
L298 Motor Driver Library for Proteus comes as a RAR archive of 2 files (2.1 KB, 15.7 KB unpacked) holding Proteus library files. Open the File Structure tab for the full list of 2 files.
What should I do if the download does not start?
Check the browser's download list first; an ad blocker or a company firewall can also hold it back, so try another browser or network. If the file arrives incomplete, download it again. For an installation problem, read the Install tab or tell us in the comments with your software version and the exact error message.
Is this file free?
Yes. Every file in the TEP Download Center is free for learning, personal and student projects. If you share it, link back to this page or the tutorial so others find the latest version.
How do I check that the file arrived complete?
Compare its SHA-256 with the one on this page, dc5631b7bc2a34a0b724dd763c2deaa53aee26efa93e009721a09e4320fed742. In PowerShell run Get-FileHash "L298 Motor Driver Library for Proteus.rar"; on macOS or Linux run shasum -a 256 "L298 Motor Driver Library for Proteus.rar". The same value means the file is exactly the one in our storage; a different one means the download broke off, so download it again.
Do I need WinRAR to open the RAR file?
RAR archives need WinRAR, 7-Zip or another RAR-capable tool; Windows cannot open them on its own. Extract the whole archive before using the files.
Where do I put the LIB and IDX files?
Both files go into the LIBRARY folder of your Proteus installation (Proteus 8: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY; Proteus 7 has the same folder under its own name). Restart Proteus afterwards and search for the component with P.
Which Proteus version does the library need?
The tutorial names the Proteus version the library was made and tested with. Most TEP libraries work in Proteus 7 and Proteus 8; if the component does not appear after a restart, check that both the LIB and the IDX file were copied and that Proteus was fully closed while copying.
Why does the component show but not simulate?
A library without a model file (DLL) gives you the symbol and the pins for drawing and PCB design; the simulation needs the matching model or a HEX file on the controller, exactly as the tutorial describes.
Are there other files for this tutorial?
Yes, this tutorial has 2 downloads; the others are listed under the panel. Each has its own page and countdown.
Members skip the wait. Log in or join TEP.
- 41,901Total downloads
- 34%Popularity
- ProteusCategory
- 0Comments
- ssyedzainnasirUploaded by
- 16 Sep 2017Uploaded at
SHA-256dc5631b7bc2a34a0b724dd763c2deaa53aee26efa93e009721a09e4320fed742
Need help with this file?
TagsRelated Proteus
All Proteus tutorials
Comments
0