TEP DOWNLOAD CENTER

Project Files of Stepper Motor Speed Control using Arduino

Libraries Code Projects Simulation

tep://download-terminal Stepper_Motor_Speed_Control.rar RAR archiveVerified0 downloadsFree

Stepper motor speed control using Arduino, Stepper motor speed control with Arduino, How to control the speed of the stepper motor, Control stepper motor speed via arduino, control stepper motor speed using arduino, speed control of stepper motor using Arduino

Arduino sketch · File 1 of 1

Download Arduino Code

Download Arduino Code comes as a RAR archive of 5 files (2 KB, 2.7 KB unpacked) holding an Arduino sketch.

INOArduino sketch

Description

This is the download page of Arduino Code, the file package of the tutorial Stepper Motor Speed Control using Arduino, published on The Engineering Projects in April 2017. Here you get the RAR file (2 KB) with an Arduino sketch, the list of files it contains, the README when there is one, and the installation steps in order.

What this package is

Arduino Code contains the Arduino code of Stepper Motor Speed Control using Arduino: Accelrate_Motor.ino, AntiClockwise.ino and Clockwise.ino and 2 more. Open it in the Arduino IDE, choose your board and port, and upload; the tutorial walks through every line, so you know what to change for your own wiring.

The tutorial opens with: “Hello everyone! I hope you all will be absolutely fine and fun.” That article is the detailed guide; the sections below cover the files.

What is inside the RAR file

Accelrate_Motor.ino – Arduino sketch, 427 B
AntiClockwise.ino – Arduino sketch, 327 B
Clockwise.ino – Arduino sketch, 340 B
Deaccelerate.ino – Arduino sketch, 263 B
Stepper_Motor_Speed_Control.ino – Arduino sketch, 1.4 KB

The archive unpacks to 2.7 KB; there is no README inside, so the steps below stand in for it.

How to download

Use the download panel at the top of this page: after the counter (30 seconds for guests, 10 for members) the black button unlocks and Stepper_Motor_Speed_Control.rar comes straight from our content network. If the browser opens it instead of saving, use Save as; extract the whole archive before using anything inside it.

How to install

Step 1: Extract Stepper_Motor_Speed_Control.rar with Windows (Extract All), 7-Zip or WinRAR, keeping its folders.
Step 2: Open Accelrate_Motor.ino, AntiClockwise.ino and Clockwise.ino and 2 more in the Arduino IDE, pick board and port and Verify (Export Compiled Binary gives the HEX).

Read the detailed guide

This page is for the files. The full tutorial, Stepper Motor Speed Control using Arduino, explains the circuit and the code step by step and shows the working results; read it before you build. Questions about the download or the installation go in the comments below; more Arduino downloads are listed further down this page.

The package is free for personal, educational and research projects; credit The Engineering Projects and link to this page when you share it rather than re-uploading the file.

Read Stepper Motor Speed Control using Arduino

File Structure

Stepper_Motor_Speed_Control.rar5 files · 1 folders · 2.7 KB unpacked

Stepper_Motor_Speed_Control/5 files · 2.7 KB

INO Accelrate_Motor.inoArduino sketch 427 B

INO AntiClockwise.inoArduino sketch 327 B

INO Clockwise.inoArduino sketch 340 B

INO Deaccelerate.inoArduino sketch 263 B

INO Stepper_Motor_Speed_Control.inoArduino sketch 1.4 KB

Gallery6 images from the tutorialOpen the tutorial

The circuit, the board and the results as they appear in Stepper Motor Speed Control using Arduino. Open an image for its full size.

README

README no readme

This package has no README file. The Install tab explains where each file goes, and the tutorial Stepper Motor Speed Control using Arduino walks through the whole project.

Development1 release

24 Apr 2017
Download Arduino Codethis page

The only release of this package so far. When a newer version is published, it appears above with its own download page.

Installation3 steps

From the download to a working project, in order. The steps follow what the package contains.

You will need

Arduino IDE1.8 or 2.x, with the board of the tutorial chosen under Tools → Board
WinRAR or 7-ZipWindows cannot open RAR archives on its own

Steps

1
Extract the archive
Right-click Stepper_Motor_Speed_Control.rar and choose Extract All (or open it with 7-Zip or WinRAR) into a folder you can find again. Keep its folder structure (Stepper_Motor_Speed_Control) as it is.
2
Open the sketch in the Arduino IDE
Open Accelrate_Motor.ino, AntiClockwise.ino and Clockwise.ino and 2 more, select your board and port under Tools, then Verify. Sketch → Export Compiled Binary writes the HEX file a simulation needs.
3
Follow the tutorial
Stepper Motor Speed Control using Arduino explains every connection and setting in order; keep it open beside the files while you build.

How to add a library in Proteus 8

FAQs7 questionsContact TEP

How do I download Download Arduino Code?

Wait for the 30-second guest countdown on this page, then press the download button; the file comes straight from our storage. Members who are logged in skip the wait. If the browser opens the file instead of saving it, use its Save as option. The download link is made for you when the countdown ends and works for 15 minutes; a saved or shared link stops working, so share this page instead.

What is inside the archive?

Download Arduino Code comes as a RAR archive of 5 files (2 KB, 2.7 KB unpacked) holding an Arduino sketch. Open the File Structure tab for the full list of 5 files.

What should I do if the download does not start?

Check the browser's download list first; an ad blocker or a company firewall can also hold it back, so try another browser or network. If the file arrives incomplete, download it again. For an installation problem, read the Install tab or tell us in the comments with your software version and the exact error message.

Is this file free?

Yes. Every file in the TEP Download Center is free for learning, personal and student projects. If you share it, link back to this page or the tutorial so others find the latest version.

How do I check that the file arrived complete?

Compare its SHA-256 with the one on this page, 3b2b8d11d1e5fead06afe76841769ab45173fcf26b6740d6eee4e89d9f8151ee. In PowerShell run Get-FileHash "Stepper_Motor_Speed_Control.rar"; on macOS or Linux run shasum -a 256 "Stepper_Motor_Speed_Control.rar". The same value means the file is exactly the one in our storage; a different one means the download broke off, so download it again.

Do I need WinRAR to open the RAR file?

RAR archives need WinRAR, 7-Zip or another RAR-capable tool; Windows cannot open them on its own. Extract the whole archive before using the files.

How do I get the HEX file into the simulation?

Compile the sketch in the Arduino IDE (Sketch → Export Compiled Binary gives you the HEX next to the sketch), then in Proteus double-click the board, set Program File to that HEX and run.

preparing · Stepper_Motor_Speed_Control.rar

Rating

Your download will be ready shortly

Preparing your download…

Members skip the wait. Log in or join TEP.