Introduction to 2N3772

Hello friends! I hope you all will be absolutely fine and having fun. Today, I am going to give you an elaboration on Introduction to 2N3772. I have already shared basic knowledge about different IC's and transistors in my previous tutorials e.g. Introduction to IRF540, BC547, MMBD914, LM339, LM224 and LM386. You must have alook at these tutorials before going into the details of this tutorials. It will be quite helpful in the better understanding of this article. 2N-3772 is basically a type of central semiconductor. It is basically a Negative Positive Negative (NPN) semiconductor. This semiconductor is designed by the process named as epitiaxial process. The main purpose behind its designing is to provide the high power based amplification process and fast switching applications. The structure of 2N-3772 is mounted in JEDEC TO-3 metalic case. It is most suitable for inductive switching as well as linear amplifiers. 2N-3772 has a lot of amazing and unique features. These features include low saturation voltage for collector emitter junction. This voltage is around 4 volts. Capability of forward biased 2nd breakdown current is it another unique features among its competitors. 2N-3772 is also available in lead (Pb) free packages in the market these days. It has a wide range of applications in real life. Its most common real life applications include its use in linear amplifiers, fast switching devices, inductive switching, series pas regulators and many more that may be discussed later. This is the brief introduction to 2N3772. Thee further information about the basic use of 2N-3772 will be given later in this tutorial.

Introduction to 2N3772

2N3772 is an Negative Positive Negative (NPN) transistor. It belongs to the family of central semiconductors. It is enveloped in JEDEC TO-3 metalic structure. It is available at low cost while providing higher efficiency as compared to the other similar devices. It is easily available in the market and most of the time it is known on the basis of its applications. It has several different amazing features including low collector-emitter junction voltage, capable of forward biased current break-down. Its applications are include inductive switching, General Purpose (GP) linear amplifiers, series pas regulators and a lot more. "N-3772 is given in the figure shown below.
1. 2N3772 Pins
  • Similar to the other transistor, it also has total three (3) pins.
  • The names of all the pins are listed in the table given in the figure shown below.
2. 2N3772 Pin Symbols
  • In order to avoid the complexity, each pin is simply assigned with the first letter of its name.
  • The symbols assigned to each pin are provided in table given in the figure shown below.
3. 2N3772 Pin Symbolic Representation
  • Symbolic representation of a device shows its symbol for theoretical use.
  • 2N-3772 symbolic representation is shown in the figure below.
4. 2N3772 Pinout
  • One must know about the pin configuration of any electronic device before using it.
  • Pins configuration can be easily estimated via pinout diagram of an electronic device.
  • I have also shared pinout diagram of different electronic devices in Introduction to L293D, L298, LM117, LM339, NE555, NE556, TL431 and TL072
  • 2N-3772 pinout diagram is given in the figure shown below.
  • From the above figure, you can see that I have provided the pins information as well as its real image for the better understanding.
5. 2N3772 Ratings
  • Power requirements of each electronic device are very important parameters to operate them appropriately.
  • If we don't know about the power requirements of a particular device, then providing slight higher voltage or current, it may be damaged immediately.
  • Power requirements can be estimated from the power ratings of any device.
  • Power ratings of 2N-3772 are listed in the table shown in the figure given below.
6. 2N3772 Electrical Characteristics
  • It shows the electrical requirements of any electronic device.
  • 2N-3772 electrical characteristics are listed in the table shown in the figure below.
7. 2N3772 Features
  • Features belong to such parameters which are normally considered to be the most important key to success of any device while designing it.
  • Unique features can make a device more popular.
  • 2N-3772 common features are provided in the table shown in the figure given below.
8. 2N3772 Applications
  • Applications are directly related to the popularity and sale of a product in the market.
  • Larger the area of applications, higher will be chance of its sale.
  • 2N-3772 application are listed in the table given in the figure shown below.
  • Charging test time circuit for 2N-3772 is shown in the figure given below.
The tutorial Introduction to 2N3772, has provided the platform consisting of all the necessary and important details about the basics of 2N3772, that one must know before its use. I hope you have enjoyed the tutorial. If there is something missing in this article, please do let me know. I will immediately update it correspondingly so that the future convenience can be avoided. If you have any sort of issue, you can ask us inn comments anytime you want to! Our team is 24/7 available to support you. We will try our level  best to sort out your problems as soon as possible. I will share a lot of interesting as well as informative topics in my upcoming tutorials. So, till my next tutorial, take care and bye bye :)
Syed Zain Nasir

I am Syed Zain Nasir, the founder of <a href=https://www.TheEngineeringProjects.com/>The Engineering Projects</a> (TEP). I am a programmer since 2009 before that I just search things, make small projects and now I am sharing my knowledge through this platform.I also work as a freelancer and did many projects related to programming and electrical circuitry. <a href=https://plus.google.com/+SyedZainNasir/>My Google Profile+</a>

Share
Published by
Syed Zain Nasir