Login
Signup
Quick question about threads in a working drawing.
For my semester project, I made a beam-type steam engine in Autodesk Inventor. I thought it would be cool to add real threads to my assembly, so I dow ...
0
753
Outlook question help and information.
11:33 PM
Question on calculating flow velocity and selecting orfice size
I have a machine that has a square tube header fed from a 4" water line at 20 PSI and around 65F. The header then has 20 orificed outlets that feed sp ...
0
753
IPS Versus NPT Pipe Thread Standards: What Is the Difference?
IPS Versus NPT Pipe Thread Standards: What Is the Difference?
What is the difference between IPS and NPT threads?
0
753
Basic Spur Gear design/formula help.
Designing a prototype for future manufacturing. I have referenced 4-5 different formula pamphlets etc. over the last week or so on Spur Gear design an ...
0
753
Is this gear possible?
Does a gear exist that would allow the motor to drive two different sets of gears depending on back-driving resistance? In other words the gear would ...
0
753
Simulation help
Hello, I need to find a way to simulate a pin that pushes down on a leather sample and causes the leather to be compressed on the pressured region. I ...
0
753
Molten Sodium as Heat Transfer Fluid
Hi,
I'm looking at doing a research project on using molten sodium as a heat transfer fluid in a Concentrated Solar Power plant and was struggling to ...
0
753
Is their a Standard for Hydraulic or Pneumatic systems?
Hi All,
I mainly come from a pressure vessel background where vessel are designed to conform with ASME Div 8 or PD5500. I was wondering if there is a ...
0
753
Photography or Continue Engineering
I'am a student of mechanical engineering,2 year in diploma.After 2 year I realize I'am not interested in engineering I love to capture nature photo I ...
0
753
Associate Engineer
Arduino Code Serial Communication
