Hello friends, I hope you all are doing great. Today, I am going to share a list of RFID and NFC Libraries for Proteus . RFID readers are everywhere in engineering projects: attendance systems, door locks, library management, parking gates, cashless canteens and inventory trackers. NFC, its close relative, is what your phone uses to read a tag or pay at a shop. If your project needs to know who is there or what is on the shelf, an RFID or NFC reader is the answer. In a real project, you need the reader, the right cards and a lot of trial and error before your access control code works. Our RFID and NFC libraries give you all of that inside Proteus: each reader comes with four virtual cards on a control panel, and you place a card on the reader with a single click. The Arduino reads the car ...
Hello friends, I hope you all are doing great. Today, I am going to share the new EM18 RFID Library for Proteus V1.1 . The EM-18 is a small black 125 kHz RFID reader: hold a card or a keyfob near it, and it sends the tag's number to your Arduino as 12 characters on a serial line. With this EM18 RFID Library for Proteus , you place tags on the reader with a click, at a distance you choose, and your Arduino reads them exactly like a real EM-18. Version 1.1 replaces the first version of this post. You now get two devices : EM18 Simple , with a tag panel on the schematic, and EM18 Advance , with a pop-up tag wallet, a tag editor and four measured RFID test tools . The new EM18 Arduino Proteus demo is a small access-control system on two Arduino UNOs, shown in the compact Simple interface of ou ...
