TEP DOWNLOAD CENTER

Switch (Toggle, Rocker and DIP) PCB Footprint

Libraries Code Projects Simulation

tep://download-terminal TEP_SW_ESwitch100_Wired_1x02_P2.54mm.kicad_mod KiCad footprintVerifiedFree

E-Switch 100SP1T1B1M1QE miniature toggle switch: dark 12.70 by 6.86 mm case under a stainless housing, 1/4-40 nickel bushing with a hex nut, plain chrome bat lever tilted 25 degrees and three solder lugs 4.70 mm apart.

PCB / schematic · File 1 of 1

SW_ESwitch100_Wired_1x02_P2.54mm KiCad PCB Footprint

Switch (Toggle, Rocker and DIP) · 100SP1T1B1M1QE · E-Switch 100 miniature: an editable KiCad footprint with 2 numbered pads at 2.54 mm pitch pitch.

PCBPCB / schematic

Description

Editable KiCad footprint with numbered copper pads, drill dimensions and package outlines.

Use in KiCad

Download the .kicad_mod file.
Create a folder named TEP.pretty and put the file inside.
In KiCad, open Preferences → Manage Footprint Libraries and add that folder.
Select the footprint in the Footprint Editor or assign it to your schematic symbol.

Dimensions are in millimeters. Confirm the package and pin mapping against your chosen part before fabrication. This is a footprint, not a complete PCB or 3D model.

Read Switch (Toggle, Rocker and DIP)

File Structure

TEP_SW_ESwitch100_Wired_1x02_P2.54mm.kicad_modKiCad footprint · 1.5 KB. A single file: nothing to extract, open it as described in the Install tab.

Installation4 steps

From the download to a working project, in order. The steps follow what the package contains.

You will need

KiCadAdd the .kicad_mod file to a .pretty footprint library.

Steps

1
Create a footprint library
Create a folder named TEP.pretty and put the downloaded .kicad_mod file inside.
2
Add it to KiCad
Open Preferences → Manage Footprint Libraries and add the TEP.pretty folder. Open the footprint in the Footprint Editor or assign it to a schematic symbol.
3
Check your chosen package
Verify the pin mapping, pad dimensions and drill sizes against your component before fabricating the PCB. Dimensions are in millimeters.
4
Check the component datasheet
Use the Switch (Toggle, Rocker and DIP) package drawing and pinout to confirm pad numbers and dimensions before manufacturing.

FAQs5 questionsContact TEP

How do I download the Switch (Toggle, Rocker and DIP) footprint?

Select the matching package, wait for the countdown and press Download. Guests wait 30 seconds and signed-in members wait 10 seconds.

What if the download does not start?

Check your browser's downloads, then try the button again. Expired links renew automatically. For help, use Bug report below and include your browser and KiCad version.

Which package should I choose?

This selection is 100SP1T1B1M1QE in E-Switch 100 miniature. Match your actual component's package and pad numbering; through-hole and surface-mount footprints are not interchangeable.

Does this include a complete PCB or 3D model?

This .kicad_mod file is an editable footprint. The interactive datasheet separately provides schematic, pinout and 3D previews.

How can I verify the file?

Compare its SHA-256 against the checksum on this page. In PowerShell run Get-FileHash TEP_SW_ESwitch100_Wired_1x02_P2.54mm.kicad_mod.

preparing · TEP_SW_ESwitch100_Wired_1x02_P2.54mm.kicad_mod

Verified footprint

Your download will be ready shortly

Preparing your download…

Members skip the wait. Log in or join TEP.