Hello friends, I hope you all are doing great. Today, I am going to share the new nRF24L01+PA+LNA Library for Proteus V1.1 . The nRF24L01+PA+LNA is the long-range version of the popular nRF24L01: the same Nordic 2.4 GHz chip, plus a power amplifier , a low-noise amplifier and a rubber-duck antenna on an SMA connector . With this nRF24L01 PA LNA Library for Proteus , two Arduino boards exchange packets with the unmodified RF24 library, and one click moves the radios from 1 m to 2 km apart, so you can see where the link works, where it breaks and why. Version 1.1 replaces the first version of this post. You now get two devices : nRF24L01+PA+LNA Simple , with its control panel on the schematic, and nRF24L01+PA+LNA Advance , with a pop-up window and four measured RF test tools . The board is r ...
Hello friends, I hope you all are doing great. Today, I am going to share the new nRF24L01 Library for Proteus V1.1 . The nRF24L01 is Nordic Semiconductor's small 2.4 GHz radio, and the black board with the zig-zag antenna is one of the most popular ways to send data from one Arduino to another without a wire. With this nRF24L01 Library for Proteus , two modules in one design talk over a simulated 2.4 GHz air, and your Arduino drives them over SPI with the same RF24 library you use on real hardware. Version 1.1 replaces the first version of this post. You now get two devices : nRF24L01 Simple , with its control panel on the schematic, and nRF24L01 Advance , with a pop-up window and four measured RF test tools . The v1.0 range switch is gone: you now choose the distance , and the model work ...
