Tag: 4-20 mA current loop transmitter

1 articles found.

ESP32 4-20 mA Gas Detector with an MQ-4 Sensor - Proteus Simulation

ESP32 4-20 mA Gas Detector with an MQ-4 Sensor - Proteus Simulation: the ESP32, the MQ-4, the MCP4725, the LM358, the 2N7000 and the panel meter

Hello friends, I hope you all are doing great. Today, I am going to share the ESP32 4-20 mA Gas Detector with an MQ-4 Sensor - Proteus Simulation , the thirty-seventh project of our IoT Projects series. If you have searched for a Proteus simulation of an ESP32 with a 4-20 mA current loop output, here is a complete one. An ESP32 DevKit V1 reads an MQ-4 methane sensor and sends the gas reading the way industry does, as a current between 4 and 20 milliamperes: an MCP4725 DAC, an LM358 op-amp and a 2N7000 MOSFET turn the reading into the loop current, the ESP32 reads that current back to catch a cut cable, an analog panel meter shows it in the "control room", and a live web dashboard on a laptop or a phone shows the gas in ppm and in percent of the lower explosive limit. Walk into any factory, ...