Hello friends, I hope you all are doing great. Today, I am going to share the new MAX6675 Thermocouple Library for Proteus V1.0 . The MAX6675 and a K-type thermocouple measure what other sensors cannot touch: ovens, kilns, soldering irons, 3D printer nozzles, smokers, exhaust pipes and furnaces, from room temperature up to 1023.75 C. Now you can build and test them in Proteus, with the red MAX6675 module and the stainless K-type probe on its braided cable. Behind the parts sit our own models , not a part that shows a number. The probe is a real thermocouple in the analog simulation: it puts the microvolts of the type K table between its two leads. The MAX6675 reads those microvolts, adds the cold junction , the temperature of its own board, and sends the result to the Arduino as a 16-bit w ...