Hello friends, I hope you all are doing great. Today, I am going to share the new MCP2515 CAN Bus Module Library for Proteus V1.0 . CAN is the network inside every modern car: the engine, the brakes, the dashboard and dozens of other controllers share two wires, CANH and CANL, and talk without a master. Tractors, lifts, robots and factory machines use it too. The cheap blue MCP2515 module with its TJA1050 transceiver puts an Arduino on such a bus over SPI. Until now there was no MCP2515 in Proteus on which you could watch two Arduinos talk over CAN. Behind the parts sits our own model , written from the MCP2515 datasheet and the CAN 2.0 specification. It answers the SPI instructions of the chip, keeps its registers, and puts every frame on CANH and CANL bit by bit : the identifier, the dat ...