Project Files of Display ADC value on LCD using Arduino

This is the download page of Proteus Simulation and Arduino Hex File, the file package of the tutorial Display ADC value on LCD using Arduino, published on The Engineering Projects in April 2015. Here you get the RAR file (28 KB) with a ready Proteus simulation and the compiled HEX firmware, the list of files it contains, the README when there is one, and the installation steps in order.

What this package is

Proteus Simulation and Arduino Hex File is the firmware package of Display ADC value on LCD using Arduino: the compiled HEX (ArduinoLcdCtPt.cpp.hex), together with the Proteus project Arduino LCD.DSN that runs it. Build the source with the compiler the tutorial names, or load the HEX straight away to see the project work.

The tutorial opens with: “Hello friends! Today we will read analog voltages with an Arduino Uno and display both the ADC readings and calculated voltages on a 20 × 4 LCD.” That article is the detailed guide; the sections below cover the files.

What is inside the RAR file

• Arduino LCD.DSN – Proteus simulation, 116.8 KB
• ArduinoLcdCtPt.cpp.hex – Compiled HEX file, 13.4 KB
• Arduino LCD.PWI – PWI file, 1.3 KB
• Last Loaded Arduino LCD.DBK – DBK file, 23.2 KB

The archive unpacks to 154.6 KB; there is no README inside, so the steps below stand in for it.

How to download

Use the download panel at the top of this page: after the counter (30 seconds for guests, 10 for members) the black button unlocks and DisplayADCvalueonLCDusingArduinoinProteusISIS.rar comes straight from our content network. If the browser opens it instead of saving, use Save as; extract the whole archive before using anything inside it.

How to install

• Step 1: Extract DisplayADCvalueonLCDusingArduinoinProteusISIS.rar with Windows (Extract All), 7-Zip or WinRAR, keeping its folders.
• Step 2: In Proteus set the controller's Program File to ArduinoLcdCtPt.cpp.hex; on hardware, flash the same file.
• Step 3: Open Arduino LCD.DSN in Proteus and press Play.

Simulation and results

The included Proteus project (Arduino LCD.DSN) is the quickest way to see Proteus Simulation and Arduino Hex working: open it, press Play and compare with the screenshots in the tutorial. If nothing runs, make sure every library file was copied before Proteus started and that Program File points at the HEX on your disk; the FAQs tab covers the usual causes.

Read the detailed guide

This page is for the files. The full tutorial, Display ADC value on LCD using Arduino, explains the circuit and the code step by step and shows the working results and the simulation; read it before you build. Questions about the download or the installation go in the comments below; more Arduino downloads are listed further down this page.

The package is free for personal, educational and research projects; credit The Engineering Projects and link to this page when you share it rather than re-uploading the file.