TEP DOWNLOAD CENTER

Project Files of LCD Interfacing with Microcontrollers

Libraries Code Projects Simulation

tep://download-terminal New LCD Library for Proteus.rar RAR archiveVerified0 downloadsFree

LCD Interfacing with Microcontrollers, LCD Interfacng, LCD interfaced with microcontrollers, LCD with microcontrollers, How to interface LCD with microcontrollers, Microcontrollers with LCD, Interfacing LCD using microcontrollers, Interfacing of LCD using microcontrollers, Microcontrolers having interfaced LCD

Proteus library · File 1 of 5

Download LCD Library for Proteus

Download LCD Library for Proteus comes as a RAR archive of 4 files (19.6 KB, 149.9 KB unpacked) holding Proteus library files, a Proteus simulation and an Arduino sketch.

LIBProteus library
IDXProteus library index
DSNProteus simulation
INOArduino sketch

Description

This is the download page of LCD Library for Proteus, the file package of the tutorial LCD Interfacing with Microcontrollers, published on The Engineering Projects in May 2017. Here you get the RAR file (19.6 KB) with the Proteus library files (LIB and IDX), a ready Proteus simulation and an Arduino sketch, the list of files it contains, the README when there is one, and the installation steps in order.

What this library is

LCD Library for Proteus adds LCD to Proteus as a schematic component: once installed, the part appears in the Pick Devices list under its own name, with its real pin layout, and can be placed and wired like any built-in device. It is a symbol-and-footprint library: it draws and routes the part; to see it work in simulation, pair it with the HEX file or the controller model as the tutorial shows.

What is inside the RAR file

LCDLibraryTEP.LIB – Proteus library, 44.4 KB
LCDLibraryTEP.IDX – Library index, 238 B
New LCD Library for Proteus.DSN – Proteus simulation, 104.9 KB
New_LCD_Library_for_Proteus.ino – Arduino sketch, 385 B

The archive unpacks to 149.9 KB; there is no README inside, so the steps below stand in for it.

How to download

Use the download panel at the top of this page: after the counter (30 seconds for guests, 10 for members) the black button unlocks and New LCD Library for Proteus.rar comes straight from our content network. If the browser opens it instead of saving, use Save as; extract the whole archive before using anything inside it.

How to install

Step 1: Extract New LCD Library for Proteus.rar with Windows (Extract All), 7-Zip or WinRAR, keeping its folders.
Step 2: Close Proteus and copy LCDLibraryTEP.LIB and LCDLibraryTEP.IDX into its LIBRARY folder (Proteus 8: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY).
Step 3: Start Proteus, press P and search for "LCDLibraryTEP"; place and wire it as in the tutorial.
Step 4: Open New_LCD_Library_for_Proteus.ino in the Arduino IDE, pick board and port and Verify (Export Compiled Binary gives the HEX).
Step 5: Open New LCD Library for Proteus.DSN in Proteus and press Play.

Read the detailed guide

This page is for the files. The full tutorial, LCD Interfacing with Microcontrollers, explains the circuit and the code step by step and shows the working results and the simulation; read it before you build. Questions about the download or the installation go in the comments below; more LCD Projects downloads are listed further down this page.

The package is free for personal, educational and research projects; credit The Engineering Projects and link to this page when you share it rather than re-uploading the file.

Read LCD Interfacing with Microcontrollers

File Structure

New LCD Library for Proteus.rar4 files · 3 folders · 149.9 KB unpacked

New LCD Library for Proteus/4 files · 149.9 KB

Library/2 files · 44.6 KB

IDX LCDLibraryTEP.IDXLibrary index 238 B

LIB LCDLibraryTEP.LIBProteus library 44.4 KB

New_LCD_Library_for_Proteus/1 file · 385 B

INO New_LCD_Library_for_Proteus.inoArduino sketch 385 B

DSN New LCD Library for Proteus.DSNProteus simulation 104.9 KB

Gallery12 images from the tutorialOpen the tutorial

The circuit, the board and the results as they appear in LCD Interfacing with Microcontrollers. Open an image for its full size.

README

README no readme

This package has no README file. The Install tab explains where each file goes, and the tutorial LCD Interfacing with Microcontrollers walks through the whole project.

Development1 release

28 May 2017
Download LCD Library for Proteusthis page

The only release of this package so far. When a newer version is published, it appears above with its own download page.

Installation6 steps

From the download to a working project, in order. The steps follow what the package contains.

You will need

Proteus Design SuiteProteus 8 or newer (Labcenter), on Windows
Arduino IDE1.8 or 2.x, with the board of the tutorial chosen under Tools → Board
WinRAR or 7-ZipWindows cannot open RAR archives on its own

Steps

1
Extract the archive
Right-click New LCD Library for Proteus.rar and choose Extract All (or open it with 7-Zip or WinRAR) into a folder you can find again. Keep its folder structure (New LCD Library for Proteus) as it is.
2
Copy the library files into Proteus
Move LCDLibraryTEP.LIB and LCDLibraryTEP.IDX into the LIBRARY folder of your Proteus installation: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY for Proteus 8, or the matching Proteus 7 folder. Older versions keep it under ProgramData\Labcenter Electronics. If Proteus is open, close it first.
3
Restart Proteus and place the component
Start Proteus, open a schematic, press P (Pick Devices) and search for the component by the name used in the tutorial. It appears with its pins ready to wire.
4
Open the sketch in the Arduino IDE
Open New_LCD_Library_for_Proteus.ino, select your board and port under Tools, then Verify. Sketch → Export Compiled Binary writes the HEX file a simulation needs.
5
Open the example simulation
Open New LCD Library for Proteus.DSN in Proteus to see the wiring exactly as in the tutorial. Check the controller's Program File path, then press Play.
6
Follow the tutorial
LCD Interfacing with Microcontrollers explains every connection and setting in order; keep it open beside the files while you build.

How to add a library in Proteus 8

FAQs11 questionsContact TEP

How do I download Download LCD Library for Proteus?

Wait for the 30-second guest countdown on this page, then press the download button; the file comes straight from our storage. Members who are logged in skip the wait. If the browser opens the file instead of saving it, use its Save as option. The download link is made for you when the countdown ends and works for 15 minutes; a saved or shared link stops working, so share this page instead.

What is inside the archive?

Download LCD Library for Proteus comes as a RAR archive of 4 files (19.6 KB, 149.9 KB unpacked) holding Proteus library files, a Proteus simulation and an Arduino sketch. Open the File Structure tab for the full list of 4 files.

What should I do if the download does not start?

Check the browser's download list first; an ad blocker or a company firewall can also hold it back, so try another browser or network. If the file arrives incomplete, download it again. For an installation problem, read the Install tab or tell us in the comments with your software version and the exact error message.

Is this file free?

Yes. Every file in the TEP Download Center is free for learning, personal and student projects. If you share it, link back to this page or the tutorial so others find the latest version.

How do I check that the file arrived complete?

Compare its SHA-256 with the one on this page, c6a46a94962efe61ece62dd00db608b878450169efde7da64db0335e0c3b3202. In PowerShell run Get-FileHash "New LCD Library for Proteus.rar"; on macOS or Linux run shasum -a 256 "New LCD Library for Proteus.rar". The same value means the file is exactly the one in our storage; a different one means the download broke off, so download it again.

Do I need WinRAR to open the RAR file?

RAR archives need WinRAR, 7-Zip or another RAR-capable tool; Windows cannot open them on its own. Extract the whole archive before using the files.

Where do I put the LIB and IDX files?

Both files go into the LIBRARY folder of your Proteus installation (Proteus 8: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY; Proteus 7 has the same folder under its own name). Restart Proteus afterwards and search for the component with P.

Which Proteus version does the library need?

The tutorial names the Proteus version the library was made and tested with. Most TEP libraries work in Proteus 7 and Proteus 8; if the component does not appear after a restart, check that both the LIB and the IDX file were copied and that Proteus was fully closed while copying.

Why does the component show but not simulate?

A library without a model file (DLL) gives you the symbol and the pins for drawing and PCB design; the simulation needs the matching model or a HEX file on the controller, exactly as the tutorial describes.

How do I get the HEX file into the simulation?

Compile the sketch in the Arduino IDE (Sketch → Export Compiled Binary gives you the HEX next to the sketch), then in Proteus double-click the board, set Program File to that HEX and run.

Are there other files for this tutorial?

Yes, this tutorial has 5 downloads; the others are listed under the panel. Each has its own page and countdown.

preparing · New LCD Library for Proteus.rar

Rating

Your download will be ready shortly

Preparing your download…

Members skip the wait. Log in or join TEP.