Hello everyone! I hope you all will be absolutely fine and having fun. Today, I am going to share my knowledge about Affect of Noise on Signal in MATLAB. Noise is basically an unwanted signal that effects the normal signal. Noise the natural signal which can be removed but can be reduced to some extent. We can see a lot of examples of the signals effected by noise in our daily lives e.g. the distorted voice signal while calling, creates hearing problems, distorted TV signal makes the video invisible and the distorted AC signal can burn most of the home as well as other appliances.
In signal processing term, noise is also known as the unwanted signal which carries no useful information. To recover the original signal from the noise effected one, ...
Hello friends, I hope you all are fine and having fun with your lives. Today, I am going to share a new project which is Receive SMS with Sim900 & PIC Microcontroller using AT Commands. I have already posted this same project on Arduino named as Receive SMS with AT Commands using Sim900 & Arduino. In that project, I have interfaced SIM900 module with Arduino but today I am gonna interface it with PIC Microcontroller.
I have also designed a GSM Library for Proteus using which you can easily now simulate your SIM900D module in Proteus. Sim900 Module is used to send and receive SMS and it is widely used in automation and security projects. I have also posted another Project in which I have designed the Proteus simulation of GSM based Home Sec ...
A lens can pass every visual inspection checkpoint and still fail in the field. That gap between "looks acceptable" and "performs as required" is where precision optics projects run into trouble, and it is a problem that optical metrology was specifically designed to address.
Visual checks are fast and practical, but they are bounded by what the eye and basic tooling can confirm. Surface cleanliness, obvious chips, and gross dimensional errors are all fair game. What they cannot reliably catch are sub-tolerance deviations in curvature, refractive index variation, or edge detection anomalies that only emerge under controlled measurement conditions. Perspective distortion alone can make a non-conforming surface appear within spec during a manual review.
...
Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at detailed Introduction to TIP41. It is an NPN power transistor. It exists in (TO-220) malleable suite which marks this expedient appropriate for acoustic, power rectilinear and swapping submissions. Its corresponding transistor is TIP42. It is intended by joining three (3) components of semiconductor material by doping with different materials. It's center portion is base which is tinny and the other two outer parts are prominently doped than the base.
Several transistors can strengthen a trivial current which will then be leading adequate to effort attention or other greater current maneuvers. These discretion are proficient to notice a shift in voltage ...
Hi folks, I hope you guys are doing great. In my previous post, I have discussed what cryptocurrency is. Before I go in detail about Bitcoin, let me tell you. Go and read the last article about cryptocurrency. As you should have information about cryptocurrency before jumping into bitcoin.
Bitcoin has become a buzz word now. It’s been around 12 years since Bitcoin release. A person or group of people name Satoshi Nakamoto emerge bitcoins that host a digital currency bitcoin.
The individuals who already knew about Bitcoin are curious about it that how is it going to leave an impact on our daily lives in the future. I am here to answer all of your questions and that will clear all your doubts and curiosity.
So we are going to cover all these top ...
Many people today rely on laser engraving to create personalized gifts and customized products, and create unique designs across different industries. This versatile technique uses a focused laser beam to make permanent, detailed marks on different materials.
During this process, the laser beams carve or etch texts, designs, or images into the materials, such as stone, metal, wood, glass, and leather. The laser vaporizes the surface of the material to create a permanent mark that may range from basic signs to detailed artwork and bold engravings.
Different kinds of lasers are used depending on the material. Fiber lasers are ideal for metals and hard plastics, while CO2 lasers are for non-plastic materials such as glass, wood, acrylic, and some plastics. Experts can also use UV lasers tha ...
Hello friends, I hope you all are fine and enjoying yourself. Today I am going to share a new project titled Interfacing of temperature sensor LM35 with Arduino UNO in Proteus ISIS. So far, I have only worked on temperature sensor DS18B20 for temperature measurements and I have also uploaded a tutorial on Interfacing of Temperature Sensor 18B20 with Arduino.
Recently I got a chance to work on a project regarding temperature sensing but the condition of this project was that to use only LM35 for temperature detection. Then, I get to know much about LM35, its operating conditions and features. So I thought I should also upload its tutorial as it will also be advantageous for engineering students. Because learning new things is always a charm.
An exc ...
For maintenance departments, frequently lost or misplaced parts represent a recurring issue that could interfere with even the most efficient operations. Consider a technician preparing to repair a vital machine, only to discover that the necessary part is unavailable. This situation leads to reduced efficiency, increased irritation, and extended periods of inactivity.
With the introduction of parts inventory management software
, maintenance workers can now easily track their spare parts, tools, and available supplies in real-time, considerably reducing the time spent on spreadsheets and estimates.
The Hidden Costs of Poor Parts Management
Problems can arise from poor inventory management if you have ever worked with maintenance employees. A missing instrument may seem insignificant ...
Hello friends! I hope you will be absolutely fine and having fun. Today, I am going to share that how to make a program for Stepper Motor Direction Control using Matlab. I am going to share this tutorial on demand. I have also make different programs for DC Motor Direction Control using Arduino, DC Motor Direction Control in Matlab, DC Motor Direction Control using LabVIEW, DC Motor Speed Control using Arduino, DC Motor Speed Control using Matlab and Stepper Motor Direction using Arduino in my previous tutorials. So before going into the detail of this tutorial you must have to go through these tutorial because I will use the same hardware and a bit changed Arduino source code. In this tutorial I will make an algorithm to send different commands ...
Hey Guys! I hope you are doing great and having fun. Today, I am going to give you the details on the Introduction to 2n3053. It is an NPN bipolar junction transistor which is mainly designed for amplification and switching applications. It consists of P doped semiconductor that exists between the two N doped layers. I'll give you a brief details about this transistor so you don't have to go anywhere to finding information regarding this transistor. Let's get started.
Introduction to 2n3053
2n3053 is an NPN bipolar junction transistor which is mainly used for general purpose amplification and switching purpose.
It consists of three terminals called emitter, base, and collector. and comes in TO-39 Metal Can Package.
This NPN transistor exhib ...
