Hello friends, I hope you all are doing great. In today’s tutorial, we will have a look at What is Diode Clipper and how to use it in rectification circuits. In different circuits especially in rectifiers, the clipper is used to maintain the predefined voltage level. These circuits do not interrupt the original signal but only control the variation in the predefined value of the signal. These circuits eliminate the variation in the original waveform at the positive half and negative half.
These circuits are created by the combination of linear components such as resistance and non-linear components like transistors and diodes. These clipping circuits are also known as the slicers. In today's post, we will also have a look at such circuits that are ...
Hello friends, I hope you all are doing great. In today’s tutorial, we will discuss What is Thermistor. A thermistor is a semiconductor temperature sensing module, its value of the resistance is larger than the conductive substances and less than the insulators. The materials used for the construction of the thermistor defined the value of resistance and temperature of the thermistor. The producers of the thermistor make accurate relationship among temperature and their resistance because it is a very important factor for the users of the thermistor.
Oxides of the metals are used for the creation of the thermistors. During their manufacturing, the ratio of the resistance and temperature is defined accuratly because it is an important factor that d ...
Hello friends, I hope you all are doing great. In today’s tutorial, we will have a look at What are Light Sensors and how to use them. Light sensors are such components that sense the surrounding light and transform it into the current. Such sensors are normally used in different applications such as switching circuits and for security purpose. When they used in different security circuits these sensors detect the variation in the light then they send the signal to the alarm.
There are numerous types of light detectors components but there operating principle is similar. The most commonly used types of light sensors are a light-emitting diode, photodiodes, infrared radiation (IR) detectors, etc. In today's post, we will have a look at working, fea ...
Hello friends, I hope you all are doing great. In today’s tutorial, we will have a look at What are Position Sensors and their practical implementation. Position sensors are such instruments used to detect the variation in the position of different components, or human beings. All movement controls networks comprise of such components that send information about the component or devices location connected with the network. These movement detectors are normally used in industries to control the operation of different machines.
Theses devices measure the complete variation in the position of the different tools or after some intervals of the time. These modules also have the ability to retains the data about the movements of a different tool, or mac ...
