Hello friends, I hope you all are doing great. Today, I am going to share the new Flex Sensor Library for Proteus V3.0 . A flex sensor is a thin plastic strip whose resistance rises when you bend it. You find it in data gloves, robot hands and game controllers, because it turns the bend of a finger into a number. With this Flex Sensor Library for Proteus , the sensor looks like the amber strip you buy, it bends right on your Proteus sheet while the simulation runs, and your Arduino reads it on A0 with analogRead() , exactly as on real hardware. Version 3.0 is the next version of our flex sensor library, after the earlier versions V1.0 and V2.0. You get three devices : the bare flex strip, a Flex Sensor Module Simple with a live panel on the schematic, and a Flex Sensor Module Advance with ...
Hello friends, I hope you all are doing great. Today, I am going to share the new Soil Moisture Sensor Library for Proteus V3.0 . The soil moisture sensor is one of the first sensors students use in a garden or agriculture project: a YL-69 fork probe that you push into the soil, and the blue FC-28 board with an LM393 comparator that gives an analog output (A0) and a digital output (D0). With this Soil Moisture Sensor Library for Proteus , you set the soil with a click, water the plant, let the sun dry it, and your Arduino reads A0 with analogRead() and D0 with digitalRead(), just like on a real board. Version 3.0 is the next version of our soil moisture library for Proteus, and it is built around an analog model : the board is made of real resistances inside Proteus's SPICE simulator, so A ...
