Hello friends, I hope you all are doing great. Today, I am going to share the new BMP280 Sensor Library for Proteus V1.1 . The BMP280 is Bosch's small digital barometer : it measures the air pressure and the temperature , and from the pressure your Arduino can work out the altitude . With this BMP280 Sensor Library for Proteus , you set the pressure and the temperature with sliders, presets or a click on an altitude bar, and your Arduino reads them over I2C with the same Adafruit BMP280 library you use on real hardware. Version 1.1 replaces the first version of this post. You now get two devices : BMP280 Simple , with a control panel on the schematic, and BMP280 Advance , with a pop-up window and four measured sensor test tools . The new BMP280 Arduino Proteus demo runs on two Arduino UNOs ...