Hello friends, I hope you all are doing great. Today, I am going to share the ENC28J60 Nano Ethernet Shield Library for Proteus . The ENC28J60 Nano shield is the smallest way to put an Arduino Nano on a wired network: a long, narrow red board with a Microchip ENC28J60 Ethernet controller, a HanRun RJ45 jack across one end and two header rows the Nano plugs into. Like the ENC28J60 module, the chip only moves Ethernet frames - the TCP/IP stack runs on the Arduino, inside the EthernetENC library. With this library you can wire the shield to your Arduino in Proteus, run EthernetENC sketches unchanged and watch every frame go by. Updates ENC28J60 Nano Ethernet Shield Library for Proteus Latest version: V1.0 (October 2026, this tutorial) Other Ethernet libraries: Ethernet Shield · Ethernet Shiel ...