Hello friends, I hope you all are doing great. Today, I am going to share the new Micro SD Card Module Library for Proteus V1.0 . The micro SD card module is how an Arduino keeps data: a data logger writes its readings to a CSV file, a game loads its levels, a clock keeps a record of every event, and you take the card to your PC afterwards. The Arduino talks to the card over SPI with four wires, and the SD library does the rest. Until now there was no SD card module in Proteus that the real SD library could read and write. Behind the parts sits our own model , written from the SD card specification. The card wakes up in SD mode and enters SPI mode on CMD0, answers CMD8, needs ACMD41 until it has finished its power-up, reports itself as a standard-capacity card with CMD58, then reads and wr ...