Hello friends, I hope you all are doing great. Today, I am going to share the new SHT31 Sensor Library for Proteus V1.1 . The SHT31 from Sensirion is a small digital temperature and humidity sensor , best known on the purple GY-SHT31-D board. With this SHT31 Sensor Library for Proteus , you set the temperature and the humidity with presets, sliders or a click on the thermometer or the water drop, and your Arduino reads them over I2C with the same Adafruit SHT31 library you use on real hardware. Version 1.1 replaces the first version of this post. You now get two devices : SHT31 Simple , with a control panel on the schematic, and SHT31 Advance , with a pop-up window and four measured sensor test tools . The model adds the ALERT pin , a heater that really warms the sensor and the real respon ...