Hello friends, I hope you all are doing great. Today, I am going to share the new Touch Sensor Library for Proteus V2.0 . It simulates the popular TTP223 capacitive touch module : the small red board with a round touch pad that works like a push button without any moving parts. With this Touch Sensor Library for Proteus , you touch the pad with the mouse or with buttons, and your Arduino reads the I/O pin exactly as it reads a real module: LOW while the pad is free and HIGH while a finger is on it. Version 2.0 is the next version of our touch sensor library, built around the behaviour of the real chip: the calibration after power-on, the slower first touch while the chip sleeps, the four jumper modes, the max on time and cover sheets in front of the pad. You get two devices : TTP223 Simple ...