Another request for help.
I would like to build a robot from ground up. What programming language should I use?
Would assembly language be the best language to use?
If so, co ...
0
753
Outlook question help and information.
11:33 PM
Help Required For Tachometer Circuit...
Hi,
I am trying to build a tachometer using IR Sensors..
I get good response at lower frequencies but as the frequency increases say to 170Hz it loose ...
0
753
Cordless drill motor
Hi there,
I want to use 4 cordless drill motors to power a mobile robot, but I need some assistance determining the thread size of the motor axis. Th ...
0
753
HT9200
HI.
I was trying to interface the DTMF generator (HT9200) to tel line.
I was able to hear the tones, but it's not dialing them!?!?!?!
Any idea? Any ...
0
753
Basics behind IR pair circuit for a line follower robot
iam interested to know about the theory behind the working of IR pair circuit used in line follower robot. i just always copy the circuit diagram from ...
0
753
how to use hard disk spindle motors
hi every one
i m need to use hard disk spindle motor for my proj bcos it gives constant high rpm like 5400 or 7200rpm. i have some dumb harddisk. pls ...
0
753
Wifi tracking stage light
Hi All:
I am considering a project which purports to use RFID wifi transmission data to track a person on a stage for a smart stage light (DMX) to aut ...
0
753
Questions in Control Theory (pole placement, stability, Kalman's Criterion)
Hi everyone !
Currently, I am studying Control Theory and I believe it is a fascinating field ! I still have a lot to learn !
Anyway, I have a questi ...
0
753
Holding pressure/variable torque
Hello! It's been ages since I posted here. Glad to still see some familiar faces active!
Anyway, I am looking for something and thought maybe the aut ...
0
753
20 Steppers
Hello,
I'm writing software which will have 20 or so variables that will update stepper motor positions simultaneously (or there abouts). I don't wan ...
0
753
Associate Engineer
Arduino Code Serial Communication
