Hello friends, I hope you all are doing great. In today’s tutorial, we will discuss What is the Future of Optical Engineering? In conjunction with the National Research Council, Scientists have highlighted that the development of optic and photonic technologies is of the utmost importance when it comes to the future of the United States. Consequently, the government is advised to create optic and photonic initiatives that would swiftly advance greater research and development of optic engineering and photonics technology.
In today's post, we will have a look at various reasons to pay attention to the future of optics and photonics technologies. So let's get started with What is the Future of Optical Engineering?
Metamaterials
Meta-materials are ...
Hello, fellows, I hope you all are doing great. In today’s tutorial, we will discuss What is Electromagnet. In 1820 physicist of Denmark Christian Orsted first time in the world found that the current produces the magnetic field. After four years of the Christian's theory in 1824 another physicist William Sturgeon who was United Kingdom native work on the findings of the Christian and created the electromagnet. It was created by the piece of iron whose design was like horse-show when the almost eighteen turns of the copper windings were rapped on the iron. The piece of iron was separated from the copper windings by insulation element.
After making these arrangements William Sturgeon connect the battery with the terminals of the copper windings, th ...
Hello friends, I hope you all are doing great. In today’s tutorial, we will discuss What is the Power Diode. The diode is a commonly used module in electrical and electronic engineering. Almost in every electronic device and engineering project diodes are used. It is a PN junction device that has 2 terminals, anode and cathode. The main function of the diode is to convert the alternating current into the direct current, this feature of the diode is called rectification. When it works on the positive cycle of the alternating current its state named as forward biased when it works on the negative cycle of the ac its operating state known as reverse biased. In 1906 the first diode was manufactured by the crystals of the minerals.
Power diode is ident ...
Hello friends, I hope you all are doing great. In today’s tutorial, we will discuss What is Full Wave Rectifier. Transformation of alternating current into the direct current is known as rectification. This conversion can be done by using a single diode or more than one diode. The diode that used for rectification is named as a rectifier. There are 2 main categories of the rectifiers, the first one is the half-wave and the other is full-wave rectifier.
In half-wave rectification circuitry, there is only single diode is used to convert alternating current into the direct current. So it can very easily design for rectification. But it has one drawback that it converts one half of the AC wave into direct current. Due to this, there is a higher power ...
Hello friends, I hope you all are doing great. In our previous lectures, we have studied two types of diodes i.e. Basic PN diode and Schottky Diode. Today, we will discuss the third type of diode i.e. Zener Diode. Zener Diode was invented by the American engineer Clarance Melvin Zener, so it's named after him. The specialty of the Zener diode is that it can operate in both forward-biased and reversed-biased directions. In today's post, we will have a look at its working, features, ratings, construction and applications. So let's get started with what is the Zener Diode.
What is Zener Diode?
The Zener diode is a special diode, that enables the current to flow not only from the positive terminal (anode) to the negative terminal (cathode) but also in the opposite direction.
The dop ...
Hello friends, I hope you all are doing great. In our previous lecture, we studied the Basic PN Diode in detail and today, we will discuss a special type of diode called Schottky Diode. This diode was designed by the German physicist Walter H. Schottky, so it's named after him, thus called Schottky.
This diode is mostly used in radio frequency (RF) circuits or in power supplies. So let's get started with the basics of Schottky Diode:
Schottky Diode
Schottky Diode (also called Schottky Barrier Diode or Hot Carrier Diodes), discovered by German physicist Walter H. Schottky, is a special type of diode in which the P-layer(of PN junction) is replaced by the metal layer(i.e. Aluminium, Tungsten, Molybdenum, Platinum, Chromium etc.), while the N layer is of silicon(semiconductor - ...
Hello, fellows, I hope you all are doing great. In today’s tutorial, we will discuss the Resistors in Parallel. There are 2 main connection types that used to make circuitries. One is series contact and second is parallel. If the components in the circuitries are parallel to one another they have their own branch. These branches provide differents path for the current to flow. In parallel circuitries, the current has different value across every segment of circuitry and the voltage across each part is equal to the input voltage. To solve your parallel resistance circuitry you should try our online Parallel Resistance Calculator
In today's post, we will have a look at such circuitries that have resistances connected in parallel and demonstrates how ...
Hello friends, I hope you all are doing great. In today’s tutorial, we will discuss How to Transform a Non-Profit Business with EOS. EOS has been gaining popularity around the world, enhancing the level of the business. With experienced EOS implementers, any company can achieve the heights that they have thought. However, the question arises “Can EOS implementers help these non-profit organizations as well”? How come these EOS implementers help small budgeted companies with no profit? How their tactics play an important role in right traction?
There are many organizations that provide consultancy to help companies and their leaders to manage their work in an easy systematic way. If you are looking for a business growth consultant, you can avail it ...
Hello, fellows, I hope you all are doing great. In today’s tutorial, we will discuss 5 Reasons to Get A Degree in The Engineering Field. Engineering represents the practical application of science and mathematics to find solutions to technical problems. Engineers don’t just sit back and watch. On the contrary, they design, invent, fix, improve, research, and so on. Engineers bring things to life, whether it’s physical buildings or robots.
If you want to create technology and products that make our lives easier, think about getting a degree in the engineering field. Not only is it one of the most popular college majors but also one of the most profitable ones. It might just be the right fit. These reasons will convince you that engineering is the b ...
Hello, fellows, I hope you all are doing great. In today’s tutorial, we will discuss How Virtual Reality Helps Field Engineers Deliver Value. It’s no secret that technology is advancing rapidly and is transforming how field engineers are accomplishing tasks in projects. With virtual reality taking the lead, we are witnessing an unprecedented improvement in project quality and design in the engineering field.
Virtual reality engineering involves visualization of projects using 3D modelling tools. It introduces the users directly into a computer-generated virtual environment, giving them an idea of what to expect in the field. With this technology, a field engineer can identify the potential risks and flaws in a project before implementation. So let ...
